Firmware

Tachchen,

Philips hat vor kurzem eine neue Firmware 140.39 für die 2010er Serien veröffentlicht. Zur Zeit sind die 8000er und 9000er Downloads nur verfügbar.

Release for TV550R1:

Q5553-0.140.39.0 Generation date: 03/07/2011 23:06:00

Q5551-0.140.39.0 Generation date: 04/07/2011 00:02:12

Q5521-0.140.39.0 Generation date: 03/07/2011 23:47:02

Einen Changelog gibt es bisher noch nicht.

Update 2 (19.7.2011):

Hier der vorläufige Changelog:

• Lost of presets after toggling between ASTRA and HOT Bird (between 2 LNBs).
• Picture disturbance on DVB-C channel ‘Phoenix’ (Germany region Zweibrücken).
• Lipsync on EXT, ‘audio output delay’ not working.
• When starting up, sometimes no picture.
• Russian translation errors in UI and Net TV.
• TV goes auto to standby after 2h startup in the morning (RiksTV Norwegian DVB-T network).
• TV does not react anymore on any RC key when starting from semi-Standby.

Quelle: Philips Support Forum

Update 3 (23.7.2011):

Der vorläufige Changelog ist jetzt auch offiziell und kann von den Servern geladen werden (jedoch aktuell nur in Englischer Sprache).

Update 4 (27.7.2011):

Die Firmware ist jetzt auch für die 5000er bis 7000er Serien verfügbar.

Q5553_0.140.39.0 (Date published: 2011-07-27)

• Russian OSD translation error is corrected.
• TV has no picture after start-up.
• TV does not react to remote control after wake-up from standby.
• Video delay (lipsync) observed through SCART and Component (Y Pb Pr) connection.
• Picture interference observed on digital cable (DVB-C) channels. (Only applicable to country, Germany)
• TV goes to standby by itself after 2 hours. (Only applicable to country, Norway)

Q5551_0.140.39.0 (Date published: 2011-07-27)

• Russian OSD translation error is corrected.
• TV has no picture after start-up.
• TV does not react to remote control after wake-up from standby.
• Video delay (lipsync) observed through SCART and Component (Y Pb Pr) connection.
• Picture interference observed on digital cable (DVB-C) channels. (Only applicable to country, Germany)
• TV goes to standby by itself after 2 hours. (Only applicable to country, Norway)
• Channels lost after switching between satellite channels. (Only applicable to K-models)

Q5521_0.140.39.0 (Veröffentlichungsdatum: 2011-07-27)

• Russian OSD translation error is corrected.
• TV has no picture after start-up.
• TV does not react to remote control after wake-up from standby.
• Video delay (lipsync) observed through SCART and Component (Y Pb Pr) connection.
• Picture interference observed on digital cable (DVB-C) channels. (Only applicable to country, Germany)
• TV goes to standby by itself after 2 hours. (Only applicable to country, Norway)

Toengel@Alex

Follow me on Twitter (@PhilipsToengel)

Update 5 (4.8.2011):

Noch ein paar Bilder:

Tachchen,

Philips hat gestern für die 2011er TV-Serien 3000 bis 5000 eine neue Firmware veröffentlicht:

xxPFL3606 – TPM61E_2.14 (Date published: 2011-07-15)

xxPFL4606 – TPM71E_2.10 (Date published: 2011-07-15)

xxPFL5x06 – TPM62E_2.11 (Date published: 2011-07-15)

Alle Serien haben folgenden Changelog:

• With this software your TV is Saorview certified. (Only applicable to country, Ireland)
• Enable channel reorder function for all service providers except Ziggo. (Only applicable to country, Netherlands)
• Allow users to disable the “4 hours automatic shut down” feature in the [Auto switch off] menu.

Die 5406er und 5606er haben noch zusätzlich folgende Änderung

• TV turns off and on by itself during USB playback.

Toengel@Alex

Follow me on Twitter (@PhilipsToengel)

Update 1 (20.7.2011):

Die Updates wurden wieder zurückgezogen, da es Probleme mit der Senderliste nach der Aktualisierung gab.

Update 2 (21.7.2011):

Die Updates sind wieder da und der Changelog hat sich ein wenig geändert:

IMPORTANT: There is a new improvement made in the new software release to improve the channel search efficiency, which required the TV channels to be reinstalled when you update the TV software from version

• TPM62E_2.07 (or older) to version TPM62E_2.11 (or later)
• TPM71E_2.07 (or older) to version TPM71E_2.10 (or later)
• TPM61E_2.11 (or older) to version TPM61E_2.14 (or later)

After you have reinstalled your TV channels, you can rearrange the channels to suit your preference in the channel grid with the Reorder feature in the options menu.

Tachchen,

Philips hat gerade eine neue Firmware für die 2011er TV-Serien veröffenlicht: Version 0.10.94.1

Q5551_0.10.94.1 (Date published: 2011-06-17)

• Implementation of new product range (T-series).
• TV has no picture and no sound after it wake-up from Standby.
• Teletext is not working.

Release for TV550R2:
Q5551-0.10.94.1

Generation date:
11/06/2011 09:53:41

Q5553_0.10.94.1 (Date published: 2011-06-17)

• TV has no picture and no sound after it wake-up from Standby.
• Teletext is not working.

Release for TV550R2:
Q5553-0.10.94.1

Generation date:
11/06/2011 10:11:48

Toengel@Alex

Follow me on Twitter (@PhilipsToengel)

Tachchen,

Philips hat neue Firmware-Updates für die 2011er Serien 5×06 und 3606 veröffentlicht:

32PFL5606 und 32PFL5406

TPM62E_2.07 (Date published: 2011-06-15)

• Improvement on the OSD translation.
• Improved Active Control Demo behavior.
• FIND key does not display the channel grid.

TPM62E_2.00 (Date published: 2011-04-27)

• Initial production software.

32PFL3606

TPM61E_2.11 (Date published: 2011-06-15)

• Improved German and Swedish OSD translation.
• Improved Active Control Demo behavior.

TPM61E_2.07 (Date published: 2011-05-10)

• No digital cable (DVB-C) channels were found during the installation. (Only applicable to countries, Germany and Norway)

TPM61E_2.03 (Date published: 2011-04-08)

• Initial production software.

Toengel@Alex

Follow me on Twitter (@PhilipsToengel)