Philips: Informationen zum Hardware-Upgrade-Kit für 2013er, 2014er und 2015er TVs

Erfahrungen, Feedback und Bugmeldungen zu einzelnen Firmware-Versionen
Allgemeine Hinweise zur TV-Firmware
  • Dieses Thema hat 209 Antworten sowie 2 Teilnehmer und wurde zuletzt vor vor 1 Monat, 1 Woche von misotauros aktualisiert.
Ansicht von 14 Antworten – 196 bis 209 (von insgesamt 209)
  • Autor
    Antworten
  • #195677 Antworten
    Bert Schubert

      auch alte sechser

      #195678 Antworten
      Bert Schubert

        Ich habe mit dem Verkäufer aus den Niederlande geschrieben, er mir folgendes mitgeteilt:

        Die EMMC-Software ist beschädigt. Diese Software kann nicht ersetzt werden mit der .upg-datei da diese Software alle Schlüssel usw. enthält. Philips gibt diese Software nicht heraus.
        Wenn Sie die .pkg-Datei irgendwo finden, können Sie das versuchen, diese Software setzt den Fernseher zurück, aber diese Software ist nicht öffentlich verfügbar und daher wahrscheinlich nicht zu finden.

        Die Software kann unter anderem durch ein Update auf Android O beschädigt werden, wenn ja, damit ist die Geschichte beendet. Manche Leute versuchen das, ohne zu wissen, dass dies bei diesen Motherboards nicht erlaubt ist.

        Was muss ich jetzt installieren

        #195679 Antworten
        Bert Schubert

          habe jetzt die upgrade_loader.pkg nochmal installiert nun kommt nachdem ich manuell neu gestartet habe nur das philips logo

          #195681 Antworten
          Toengel
          Administrator

            Tachchen,

            es ist richtig mit dem upgrade_loader.pkg, dass der nur alles enthält. Allerdings hat der Verkäufer unrecht mit Android TV O – das gibt es für QM164E gar nicht (Nougat, ATV 7 ist die neueste und letzte Version).

            Versuch mal einen älteren upgrade_loader.pkg für QM164E zu installieren. Vielleicht hast du damit mehr Glück.

            Toengel@Alex

            #195682 Antworten
            Bert Schubert

              wenn ich diese QM164E_0.16.56.3_upgrade_loader installiere bleibt das philips logo stehen
              und wenn ich diesen QM164E_0.16.102.24_upgrade_loader installiere dauert die installation schon länger startet dann selbständig neu geht dann aber wieder in software uprade in progress dann startet er wieder neu philips logo kommt geht dann weg jetzt kommt ein ring der sich bewegt und jetzt kommt wieder das
              Android Recover
              PHILIPS/QM16XE_F/QM16XE_f
              7.1.2./N2G48H/01610224
              user/test-keys
              Any button cycles hinglight.
              Long-press activates.
              Reboot systemnow
              Apply update from SD card
              Wipe cach partion

              — update_package: /system/etc/virgin/wipedatatool.zip

              –Wiping data…
              Performing Virgin Installation ..
              Opening update package—
              elape time = 267931 us ..
              Data wipe failed.
              E:Can´t open /cache/recovery/log
              E:Can´t open /cache/recovery/last_log
              E:Can´t open /cache/recovery/last_install
              E:Can´t open /cache/recovery/last_log
              E:Can´t open /cache/recovery/last_install

              Ich glaube ich gebe es auf

              #195683 Antworten
              Bert Schubert

                e:failed to mount /sdcard (No such file or directory)

                #195684 Antworten
                Toengel
                Administrator

                  Tachchen,

                  ich denke echt, dass der Speicher teilweise kaputt ist.

                  Toengel@Alex

                  #195685 Antworten
                  Bert Schubert

                    weiß du denn welches bauteil ds ist. B041 KLM8G1GEME ist das der nand flash

                    #196338 Antworten
                    Oguz

                      option numbers:
                      00038 33073 00003 10816
                      51782 04720 14371 00000
                      When you change it to , perfect contrast and perfect natural motion options are opened in the settings menu. Does the perfect pixel plus ultra hd engine kick in? and in the settings menu, the control keyboard language option opens. Can a keyboard remote be used?

                      #203347 Antworten
                      Klaus S.

                        Frage(n) zum Hardware-Upgrade-Kit: Mein 55PPUS9109 spinnt immer mehr rum, regelmäßiger Reset notwendig, jetzt ist auch noch Ambilight ausgefallen, am “Joystick” auf der Geräterückseite bröseln die Kabel ab…insofern denke ich über einen Mainboard-Tausch nach – und warum dann nicht gleich das Hardware Upgrade Kit?

                        Meine Fragen:
                        – wie finde ich eine Fachwerkstatt (idealerweise in Hamburg), die sowas machen kann? Die Philips-Supportseite ist da wenig hilfreich
                        – wenn ich dafür ein 2016er Mainboard brauche – ist das dann nicht schon ähnlich alt und “bröselig” wie das in meinem jetzigen Fernseher und lohnt sich der Umbau dann überhaupt noch?

                        #203348 Antworten
                        Toengel
                        Administrator

                          Tachchen,

                          ich denke nicht, dass du das Kit überhaupt noch irgendwo bekommst.

                          Toengel@Alex

                          #203352 Antworten
                          Klaus S.

                            Schade – aber danke für die schnelle Antwort.

                            Ansonsten: Tolles Blog – hat mir gerade was die Firmwareupgrades und Kaufberatung angeht schon viele nützliche Tipps gegeben und ist deutlich kompetenter als die Philips-Supportseiten.

                            #206566 Antworten
                            Daniel S.

                              Hallo,
                              ich habe einen 47PFL7108S/R1 (Upgrade Kit verbaut), der seit kurzem im Bootloop hängt (dauerhaft Philips Logo).
                              Habe erfolglos versucht, die gleiche Software nochmal aufzuspielen (QM164E_0.16.102.24)

                              – zuerst mit autorun_QM164E_000.016.102.024.upg: Jeder einzelne Schritt hat sehr lange gedauert und Update ging an irgendeinem Punkt nicht mehr weiter. Nach 2 Tagen hab ich ihn dann vom Strom genommen.
                              – danach mit QM164E_0.16.56.3_upgrade_loader: auch dies ist nicht erfolgreich gelaufen, scheitert beim Wipe

                              Kann mir jemand helfen, den Fernseher noch zu retten?

                              —–
                              Hier noch die beiden Logs:

                              1. Log: autorun_QM164E_000.016.102.024.upg

                              == Error open /dev/cb2 == !
                              Failed to CB2_InitLib !
                              SC_FCT_0: sched_getparam 871 error -1
                              SC_FCT_0: sched_getparam 892 error -1
                              SC_FCT_0: sched_getparam 893 error -1
                              set ethernet port power to down return 0
                              __bionic_open_tzdata: couldn’t find any tzdata when looking for GMT!
                              Starting MAIN recovery (pid 954) on Sun Jan 2 03:54:42 2000
                              recovery filesystem table
                              =========================
                              0 /sdcard vfat /dev/block/sda1 0
                              1 /system ext4 /dev/block/mmcblk0p6 0
                              2 /cache ext4 /dev/block/mmcblk0p8 0
                              3 /data ext4 /dev/block/mmcblk0p7 0
                              4 /factory_setting ext4 /dev/block/mmcblk0p9 0
                              5 /user_setting ext4 /dev/block/mmcblk0p16 0
                              6 /perm ext4 /dev/block/mmcblk0p9 0
                              7 /recovery emmc /dev/block/mmcblk0p4 0
                              8 /misc emmc /dev/block/mmcblk0p3 0
                              9 /boot emmc /dev/block/mmcblk0p5 0
                              10 /pq emmc /dev/block/mmcblk0p10 0
                              11 /aq emmc /dev/block/mmcblk0p11 0
                              12 /uboot_env emmc /dev/block/mmcblk0p2 0
                              13 /loader emmc /dev/block/mmcblk0p1 0
                              14 /tmp ramdisk ramdisk 0

                              I:Boot command: boot-recovery
                              I:Got arguments from boot message
                              locale is [en_GB]
                              stage is []
                              cannot find/open a drm device: No such file or directory
                              fb0 reports (possibly inaccurate):
                              vi.bits_per_pixel = 32
                              vi.red.offset = 16 .length = 8
                              vi.green.offset = 8 .length = 8
                              vi.blue.offset = 0 .length = 8
                              framebuffer: 0 (1920 x 1080)
                              erasing_text: en_GB (88 x 38 @ 975)
                              no_command_text: en_GB (166 x 38 @ 975)
                              error_text: en_GB (63 x 38 @ 975)
                              Command: “recovery”

                              ro.nrdp.validation=ninja_4
                              sys.droidtv.wakeup_reason=COLD_BOOT
                              sys.droidtv.wakeup_details.init=1
                              sys.droidtv.target_bootlevel=Recovery
                              ro.dalvik.vm.native.bridge=0
                              dalvik.vm.isa.arm.variant=cortex-a7
                              dalvik.vm.isa.arm.features=default
                              dalvik.vm.usejit=true
                              dalvik.vm.heapsize=512m
                              dalvik.vm.dex2oat-Xms=64m
                              dalvik.vm.dex2oat-Xmx=512m
                              dalvik.vm.heapmaxfree=8m
                              dalvik.vm.heapminfree=512k
                              dalvik.vm.heapstartsize=16m
                              dalvik.vm.appimageformat=lz4
                              dalvik.vm.usejitprofiles=true
                              dalvik.vm.heapgrowthlimit=192m
                              dalvik.vm.stack-trace-file=/data/anr/traces.txt
                              dalvik.vm.image-dex2oat-Xms=64m
                              dalvik.vm.image-dex2oat-Xmx=64m
                              dalvik.vm.heaptargetutilization=0.75
                              ro.config.low_mem=true
                              ro.config.ringtone=Ring_Synth_04.ogg
                              ro.config.alarm_alert=Alarm_Classic.ogg
                              ro.config.notification_sound=pixiedust.ogg
                              ro.build.fingerprint=PHILIPS/QM16XE_F/QM16XE_F:7.1.2/N2G48H/01610224:user/test-keys
                              pm.dexopt.boot=verify-profile
                              pm.dexopt.ab-ota=speed-profile
                              pm.dexopt.install=interpret-only
                              pm.dexopt.core-app=speed
                              pm.dexopt.bg-dexopt=speed-profile
                              pm.dexopt.first-boot=verify-at-runtime
                              pm.dexopt.shared-apk=speed
                              pm.dexopt.nsys-library=speed
                              pm.dexopt.forced-dexopt=speed
                              ro.pm.warmboot=1
                              ro.sf.lcd_density=213
                              ro.adb.secure=1
                              ro.com.google.gmsversion=N_preview
                              ro.mtk.pip.fullscreen=0
                              ro.mtk.4k2k.photo=1
                              ro.mtk.camera.facingback=0
                              ro.mtk.system.ci.existed=1
                              ro.mtk.system.dmv=0
                              ro.mtk.system.mhp.existed=1
                              ro.mtk.system.ttx.existed=1
                              ro.mtk.system.vss.existed=0
                              ro.mtk.system.tkui=0
                              ro.mtk.system.mheg5.existed=1
                              ro.mtk.system.subtitle.existed=1
                              ro.mtk.system.audiosync=1
                              ro.mtk.system.marketregion=cn
                              ro.mtk.system.av_record_lib=1
                              ro.mtk.twoworlds=0
                              ro.mtk.pkg_version=IDTV1501_368_001_233_001_269_001_404
                              ro.mtk.disable_scrn_rt=1
                              ro.mtk.isSupportHwVenc=1
                              ro.mtk.sys_driver_only=1
                              ro.mtk.hide_navigation_bar=1
                              ro.url.safetylegal=https://www.google.com/policies/privacy/
                              ro.boot.mode=mainrec
                              ro.boot.hardware=mt5861
                              ro.boot.serialno=000070af244593f3
                              ro.hdmi.device_type=0
                              ro.hwui.path_cache_size=8
                              ro.hwui.layer_cache_size=32
                              ro.hwui.texture_cache_size=48
                              ro.hwui.disable_scissor_opt=true
                              ro.hwui.gradient_cache_size=1
                              ro.hwui.r_buffer_cache_size=4
                              ro.hwui.drop_shadow_cache_size=4
                              ro.hwui.text_large_cache_width=2048
                              ro.hwui.text_small_cache_width=1024
                              ro.hwui.text_large_cache_height=512
                              ro.hwui.text_small_cache_height=256
                              ro.hwui.texture_cache_flushrate=0.4
                              ro.wifi.channels=
                              ro.allow.mock.location=0
                              ro.board.platform=mt5861
                              ro.build.id=N2G48H
                              ro.build.date=Wed Aug 8 05:34:28 IST 2018
                              ro.build.date.utc=1533686668
                              ro.build.host=inblrlx047
                              ro.build.tags=test-keys
                              ro.build.type=user
                              ro.build.user=build_ci
                              ro.build.flavor=QM16XE_F-user
                              ro.build.display.id=N2G48H test-keys
                              ro.build.product=QM16XE_F
                              ro.build.version.sdk=25
                              ro.build.version.asta.sdk=2
                              ro.build.version.base_os=
                              ro.build.version.release=7.1.2
                              ro.build.version.codename=REL
                              ro.build.version.incremental=eng.build_.20180808.053428
                              ro.build.version.preview_sdk=0
                              ro.build.version.all_codenames=REL
                              ro.build.version.security_patch=2018-08-05
                              ro.build.description=QM16XE_F-user 7.1.2 N2G48H eng.build_.20180808.053428 test-keys
                              ro.build.characteristics=default
                              ro.secure=1
                              ro.zygote=zygote32
                              ro.carrier=unknown
                              ro.product.cpu.abi=armeabi-v7a
                              ro.product.cpu.abi2=armeabi
                              ro.product.cpu.abilist=armeabi-v7a,armeabi
                              ro.product.cpu.abilist32=armeabi-v7a,armeabi
                              ro.product.cpu.abilist64=
                              ro.product.name=QM16XE_F
                              ro.product.board=QM16XE_F
                              ro.product.brand=PHILIPS
                              ro.product.model=QM164E
                              ro.product.device=QM16XE_F
                              ro.product.locale=en-GB
                              ro.product.manufacturer=PHILIPS
                              ro.product.first_api_level=22
                              ro.baseband=unknown
                              ro.bootmode=mainrec
                              ro.hardware=mt5861
                              ro.opengles.version=131072
                              ro.revision=0
                              ro.serialno=000070af244593f3
                              ro.tpvision.product.id=QM164E
                              ro.tpvision.product.hwboard=2K16EU1
                              ro.tpvision.product.swversion=QM164E.0.16.102.24
                              ro.bootimage.build.date=Wed Aug 8 05:34:28 IST 2018
                              ro.bootimage.build.date.utc=1533686668
                              ro.bootimage.build.fingerprint=PHILIPS/QM16XE_F/QM16XE_F:7.1.2/N2G48H/01610224:user/test-keys
                              ro.bootloader=unknown
                              ro.debuggable=0
                              ro.recovery_id=0x5ee0f3bea52777a81a4a7533f2679dea77dfdf99000000000000000000000000
                              ro.setupwizard.mode=OPTIONAL
                              ro.def_systemui_existed=0
                              ro.cts_test_with_systemui=1
                              drm.service.enabled=true
                              mtk.omx.vdp=1
                              mtk.omx.verbose.log=0
                              mtk.pms.suspend_wait_timeout=10
                              mtk.video.display=2k
                              mtk.inside=1
                              mtk.browser.lowMemoryMode=0
                              mtk.browser.useCmpbPlayer=0
                              mtk.browser.skipUABlackList=0
                              mtk.browser.alwaysFullscreen=0
                              mtk.browser.openLinkInSameTab=1
                              mtk.browser.freePlayerWhenPause=0
                              mtk.disable.screen.lock=1
                              mtk.cts_test=0
                              mtk.auto_test=0
                              mtk.stress_test=0
                              mtk.tms_support=0
                              mtk.isSupportMHL=1
                              mtk.awesomePlayer.dumpbs=0
                              mtk.isOnlyCableAtv=1
                              mtk.bgm_custom_flow=0
                              mtk.boot_log_needed=0
                              mtk.mtk_wfd_support=1
                              mtk.isSetDtmbGUILang=0
                              mtk.mtk_hdmi_support=0
                              mtk.mtk_dx_hdcp_support=0
                              mtk.mtk_wfd_sink_support=1
                              mtk.mtk_wfd_hdcp_tx_support=0
                              mtk.multi_screen_interaction=1
                              mtk.no_long_press_do_standby=1
                              mtk.mtk_wfd_sink_uibc_support=0
                              png.hw.threshold=512000
                              use.cmpb.in.gallery=0
                              init.svc.logd=running
                              init.svc.console=running
                              init.svc.healthd=running
                              init.svc.ueventd=running
                              init.svc.recovery=running
                              init.svc.recovery_config=stopped
                              wifi.interface=wlan0
                              media.wfd.sink.uibc.cap=NONE
                              media.wfd.sink.uibc-enabled=0
                              security.perf_harden=1
                              debug.atrace.tags.enableflags=0
                              net.bt.name=Android
                              net.change=net.bt.name
                              net.qtaguid_enabled=0
                              sys.pm.warmboot=1
                              sys.pm.warmboot.flag=0
                              sys.mtk.keyDisable=0
                              sys.vold.autoflag=1
                              persist.sys.usb.config=none
                              persist.sys.dalvik.vm.lib.2=libart.so
                              persist.sys.strictmode.visual=0
                              persist.sys.strictmode.disable=1

                              show_text is 1 —
                              copy recovery logs to sdcard ..
                              Clear recovery crash count success
                              Clear crash count success
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory

                              — Wiping cache…
                              Formatting /cache…
                              Creating filesystem with parameters:
                              Size: 1073741824
                              Block size: 4096
                              Blocks per group: 32768
                              Inodes per group: 8192
                              Inode size: 256
                              Journal blocks: 4096
                              Label:
                              Blocks: 262144
                              Block groups: 8
                              Reserved block group size: 63
                              Created filesystem with 11/65536 inodes and 8536/262144 blocks
                              copy recovery logs to sdcard ..
                              Cache wipe complete.
                              copy recovery logs to sdcard ..
                              Clear recovery crash count success
                              Clear crash count success
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              copy recovery logs to sdcard ..

                              2. Log: QM164E_0.16.56.3_upgrade_loader

                              == Error open /dev/cb2 == !
                              Failed to CB2_InitLib !
                              SC_FCT_0: sched_getparam 902 error -1
                              SC_FCT_0: sched_getparam 904 error -1
                              SC_FCT_0: sched_getparam 905 error -1
                              set ethernet port power to down return 0
                              __bionic_open_tzdata: couldn’t find any tzdata when looking for GMT!
                              Starting MAIN recovery (pid 966) on Sat Jan 1 16:00:26 2000
                              recovery filesystem table
                              =========================
                              0 /sdcard vfat /dev/block/sda1 0
                              1 /system ext4 /dev/block/mmcblk0p6 0
                              2 /cache ext4 /dev/block/mmcblk0p8 0
                              3 /data ext4 /dev/block/mmcblk0p7 0
                              4 /factory_setting ext4 /dev/block/mmcblk0p9 0
                              5 /user_setting ext4 /dev/block/mmcblk0p16 0
                              6 /perm ext4 /dev/block/mmcblk0p9 0
                              7 /recovery emmc /dev/block/mmcblk0p4 0
                              8 /misc emmc /dev/block/mmcblk0p3 0
                              9 /boot emmc /dev/block/mmcblk0p5 0
                              10 /pq emmc /dev/block/mmcblk0p10 0
                              11 /aq emmc /dev/block/mmcblk0p11 0
                              12 /uboot_env emmc /dev/block/mmcblk0p2 0
                              13 /loader emmc /dev/block/mmcblk0p1 0
                              14 /tmp ramdisk ramdisk 0

                              I:Boot command: boot-recovery
                              I:Got arguments from boot message
                              locale is [en_GB]
                              stage is []
                              cannot find/open a drm device: No such file or directory
                              fb0 reports (possibly inaccurate):
                              vi.bits_per_pixel = 32
                              vi.red.offset = 16 .length = 8
                              vi.green.offset = 8 .length = 8
                              vi.blue.offset = 0 .length = 8
                              framebuffer: 0 (1920 x 1080)
                              erasing_text: en_GB (88 x 38 @ 975)
                              no_command_text: en_GB (166 x 38 @ 975)
                              error_text: en_GB (63 x 38 @ 975)
                              Command: “recovery” “–wipe_data”

                              ro.nrdp.validation=ninja_4
                              sys.droidtv.wakeup_reason=COLD_BOOT
                              sys.droidtv.wakeup_details.init=1
                              sys.droidtv.target_bootlevel=Recovery
                              ro.dalvik.vm.native.bridge=0
                              dalvik.vm.isa.arm.variant=cortex-a7
                              dalvik.vm.isa.arm.features=default
                              dalvik.vm.usejit=true
                              dalvik.vm.heapsize=512m
                              dalvik.vm.dex2oat-Xms=64m
                              dalvik.vm.dex2oat-Xmx=512m
                              dalvik.vm.heapmaxfree=8m
                              dalvik.vm.heapminfree=512k
                              dalvik.vm.heapstartsize=16m
                              dalvik.vm.appimageformat=lz4
                              dalvik.vm.usejitprofiles=true
                              dalvik.vm.heapgrowthlimit=192m
                              dalvik.vm.stack-trace-file=/data/anr/traces.txt
                              dalvik.vm.image-dex2oat-Xms=64m
                              dalvik.vm.image-dex2oat-Xmx=64m
                              dalvik.vm.heaptargetutilization=0.75
                              ro.config.low_mem=true
                              ro.config.ringtone=Ring_Synth_04.ogg
                              ro.config.alarm_alert=Alarm_Classic.ogg
                              ro.config.notification_sound=pixiedust.ogg
                              ro.build.fingerprint=PHILIPS/QM16XE_F/QM16XE_F:7.1.2/NZH54D/016563:user/test-keys
                              pm.dexopt.boot=verify-profile
                              pm.dexopt.ab-ota=speed-profile
                              pm.dexopt.install=interpret-only
                              pm.dexopt.core-app=speed
                              pm.dexopt.bg-dexopt=speed-profile
                              pm.dexopt.first-boot=verify-at-runtime
                              pm.dexopt.shared-apk=speed
                              pm.dexopt.nsys-library=speed
                              pm.dexopt.forced-dexopt=speed
                              ro.pm.warmboot=1
                              ro.sf.lcd_density=213
                              ro.adb.secure=1
                              ro.com.google.gmsversion=N_preview
                              ro.mtk.pip.fullscreen=0
                              ro.mtk.4k2k.photo=1
                              ro.mtk.camera.facingback=0
                              ro.mtk.system.ci.existed=1
                              ro.mtk.system.dmv=0
                              ro.mtk.system.mhp.existed=1
                              ro.mtk.system.ttx.existed=1
                              ro.mtk.system.vss.existed=0
                              ro.mtk.system.tkui=0
                              ro.mtk.system.mheg5.existed=1
                              ro.mtk.system.subtitle.existed=1
                              ro.mtk.system.audiosync=1
                              ro.mtk.system.marketregion=cn
                              ro.mtk.system.av_record_lib=1
                              ro.mtk.twoworlds=0
                              ro.mtk.pkg_version=IDTV1501_368_001_233_001_269_001_363
                              ro.mtk.disable_scrn_rt=1
                              ro.mtk.isSupportHwVenc=1
                              ro.mtk.sys_driver_only=1
                              ro.mtk.hide_navigation_bar=1
                              ro.url.safetylegal=https://www.google.com/policies/privacy/
                              ro.boot.mode=mainrec
                              ro.boot.hardware=mt5861
                              ro.boot.serialno=000070af244593f3
                              ro.hdmi.device_type=0
                              ro.hwui.path_cache_size=8
                              ro.hwui.layer_cache_size=32
                              ro.hwui.texture_cache_size=48
                              ro.hwui.disable_scissor_opt=true
                              ro.hwui.gradient_cache_size=1
                              ro.hwui.r_buffer_cache_size=4
                              ro.hwui.drop_shadow_cache_size=4
                              ro.hwui.text_large_cache_width=2048
                              ro.hwui.text_small_cache_width=1024
                              ro.hwui.text_large_cache_height=512
                              ro.hwui.text_small_cache_height=256
                              ro.hwui.texture_cache_flushrate=0.4
                              ro.wifi.channels=
                              ro.allow.mock.location=0
                              ro.board.platform=mt5861
                              ro.build.id=NZH54D
                              ro.build.date=Tue Feb 13 21:10:18 IST 2018
                              ro.build.date.utc=1518536418
                              ro.build.host=inblrlx047
                              ro.build.tags=test-keys
                              ro.build.type=user
                              ro.build.user=build_ci
                              ro.build.flavor=QM16XE_F-user
                              ro.build.display.id=NZH54D test-keys
                              ro.build.product=QM16XE_F
                              ro.build.version.sdk=25
                              ro.build.version.asta.sdk=2
                              ro.build.version.base_os=
                              ro.build.version.release=7.1.2
                              ro.build.version.codename=REL
                              ro.build.version.incremental=eng.build_.20180213.211018
                              ro.build.version.preview_sdk=0
                              ro.build.version.all_codenames=REL
                              ro.build.version.security_patch=2017-12-05
                              ro.build.description=QM16XE_F-user 7.1.2 NZH54D eng.build_.20180213.211018 test-keys
                              ro.build.characteristics=default
                              ro.secure=1
                              ro.zygote=zygote32
                              ro.carrier=unknown
                              ro.product.cpu.abi=armeabi-v7a
                              ro.product.cpu.abi2=armeabi
                              ro.product.cpu.abilist=armeabi-v7a,armeabi
                              ro.product.cpu.abilist32=armeabi-v7a,armeabi
                              ro.product.cpu.abilist64=
                              ro.product.name=QM16XE_F
                              ro.product.board=QM16XE_F
                              ro.product.brand=PHILIPS
                              ro.product.model=QM164E
                              ro.product.device=QM16XE_F
                              ro.product.locale=en-GB
                              ro.product.manufacturer=PHILIPS
                              ro.product.first_api_level=22
                              ro.baseband=unknown
                              ro.bootmode=mainrec
                              ro.hardware=mt5861
                              ro.opengles.version=131072
                              ro.revision=0
                              ro.serialno=000070af244593f3
                              ro.tpvision.product.id=QM164E
                              ro.tpvision.product.hwboard=2K16EU1
                              ro.tpvision.product.swversion=QM164E.0.16.56.3
                              ro.bootimage.build.date=Tue Feb 13 21:10:18 IST 2018
                              ro.bootimage.build.date.utc=1518536418
                              ro.bootimage.build.fingerprint=PHILIPS/QM16XE_F/QM16XE_F:7.1.2/NZH54D/016563:user/test-keys
                              ro.bootloader=unknown
                              ro.debuggable=0
                              ro.recovery_id=0xf7815688e60afa442fc45c3ef674ee56d77fa199000000000000000000000000
                              ro.setupwizard.mode=OPTIONAL
                              ro.def_systemui_existed=0
                              ro.cts_test_with_systemui=1
                              drm.service.enabled=true
                              mtk.omx.vdp=1
                              mtk.omx.verbose.log=0
                              mtk.pms.suspend_wait_timeout=10
                              mtk.video.display=2k
                              mtk.inside=1
                              mtk.browser.lowMemoryMode=0
                              mtk.browser.useCmpbPlayer=0
                              mtk.browser.skipUABlackList=0
                              mtk.browser.alwaysFullscreen=0
                              mtk.browser.openLinkInSameTab=1
                              mtk.browser.freePlayerWhenPause=0
                              mtk.disable.screen.lock=1
                              mtk.cts_test=0
                              mtk.auto_test=0
                              mtk.stress_test=0
                              mtk.tms_support=0
                              mtk.isSupportMHL=1
                              mtk.awesomePlayer.dumpbs=0
                              mtk.isOnlyCableAtv=1
                              mtk.bgm_custom_flow=0
                              mtk.boot_log_needed=0
                              mtk.mtk_wfd_support=1
                              mtk.isSetDtmbGUILang=0
                              mtk.mtk_hdmi_support=0
                              mtk.mtk_dx_hdcp_support=0
                              mtk.mtk_wfd_sink_support=1
                              mtk.mtk_wfd_hdcp_tx_support=0
                              mtk.multi_screen_interaction=1
                              mtk.no_long_press_do_standby=1
                              mtk.mtk_wfd_sink_uibc_support=0
                              png.hw.threshold=512000
                              use.cmpb.in.gallery=0
                              init.svc.logd=running
                              init.svc.console=running
                              init.svc.healthd=running
                              init.svc.ueventd=running
                              init.svc.recovery=running
                              init.svc.recovery_config=stopped
                              wifi.interface=wlan0
                              media.wfd.sink.uibc.cap=NONE
                              media.wfd.sink.uibc-enabled=0
                              security.perf_harden=1
                              debug.atrace.tags.enableflags=0
                              net.bt.name=Android
                              net.change=net.bt.name
                              net.qtaguid_enabled=0
                              sys.pm.warmboot=1
                              sys.pm.warmboot.flag=0
                              sys.mtk.keyDisable=0
                              sys.vold.autoflag=1
                              persist.sys.usb.config=none
                              persist.sys.dalvik.vm.lib.2=libart.so
                              persist.sys.strictmode.visual=0
                              persist.sys.strictmode.disable=1

                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1
                              MTEEPROM_Read() fail, ret=-1

                              — update_package: /system/etc/virgin/wipereinstalldatatool.zip

                              — Wiping data…
                              cp: /system/etc/virgin/wipereinstalldatatool.zip: No such file or directory
                              cp: bad ‘/system/etc/virgin/wipereinstalldatatool.zip’: No such file or directory
                              Performing Virgin Installation ..
                              Opening update package…
                              sysutil: Unable to open ‘/tmp/wipereinstalldatatool.zip’: No such file or directory
                              no File Exists installstatus.txt
                              function install_package — returniing result = 2
                              elapse time = 61995 us ..
                              Data wipe failed.
                              E:Error in /cache/recovery/log
                              (I/O error)
                              copy recovery logs to sdcard ..
                              show_text is 1 —
                              E:Can’t open /cache/recovery/last_locale
                              E:Can’t open /cache/recovery/log
                              E:Can’t open /cache/recovery/last_log
                              E:Can’t open /cache/recovery/last_install
                              copy recovery logs to sdcard ..
                              MTEEPROM_Write() fail, ret=-1
                              Clear recovery crash count failed
                              MTEEPROM_Write() fail, ret=-1
                              Clear crash count failed
                              W:Can’t unlink /cache/recovery/command
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory
                              failed to open /sys/class/android_usb/android0/state: No such file or directory

                              — Wiping cache…
                              E:failed to mount /cache (Invalid argument)
                              Formatting /cache…
                              Creating filesystem with parameters:
                              Size: 1073741824
                              Block size: 4096
                              Blocks per group: 32768
                              Inodes per group: 8192
                              Inode size: 256
                              Journal blocks: 4096
                              Label:
                              Blocks: 262144
                              Block groups: 8
                              Reserved block group size: 63
                              Created filesystem with 11/65536 inodes and 8536/262144 blocks
                              warning: wipe_block_device: Discard failed

                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/log
                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/last_log
                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/last_install
                              copy recovery logs to sdcard ..
                              Cache wipe complete.
                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/last_locale
                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/log
                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/last_log
                              E:failed to mount /cache (Invalid argument)
                              E:Can’t open /cache/recovery/last_install
                              copy recovery logs to sdcard ..

                              #210812 Antworten
                              misotauros

                                Hallo allerseits!

                                Ich hatte einen 55PUS8809, dessen Bild flackert/flimmert erstanden – siehe: http://www.hifi-forum.de/index.php?action=browseT&back=1&sort=lpost&forum_id=152&thread=13255

                                und bin auf die Möglichkeit eines Upgrades gestoßen. Nun habe ich ein 43PUS6501 Board und IR/WLAN Module auf kleinanzeigen.de bestellt.

                                Mein erster Schritt wäre wohl, auf das Board die NVM für den 55PUS6501 zu flashen – nur wo finde ich die?

                                Oder kann ich direkt die /R3 NVM.bin und EED für den 55er flashen? Müsste ja ohnehin alles überschrieben werden, oder?

                                In diesem Falle, bzw. in jedem Falle brauche ich die /R3 Files, wenn ich das richtig verstanden habe. Nur finde ich die?

                                Da die Fernbedienung zum dem 43PUS6501 schon verkauft wurde, frage ich mich, ob es denn möglich wäre, die bereits verbauten Module im 55PUS8809 drin zu lassen – möglich wäre das sicher, aber wahrscheinlich wird das dann nicht von der /R3 software unterstützt?

                                Für eine weiterführende Antwort bin ich sehr dankbar!

                              Ansicht von 14 Antworten – 196 bis 209 (von insgesamt 209)
                              Antwort auf: Philips: Informationen zum Hardware-Upgrade-Kit für 2013er, 2014er und 2015er TVs
                              Deine Informationen:




                              Die Kommentieren ist durch reCAPTCHA geschützt und es gelten die Datenschutzbestimmungen und Nutzungsbedingungen von Google.

                              Toengels Philips Blog via WhatsApp-Kanal folgen (Bild antippen/anklicken)!

                              WhatsApp Logo

                              Join Toengels Philips Blog on the new WhatsApp channel (tap/click image)!