- Dieses Thema hat 454 Antworten sowie 1 Teilnehmer und wurde zuletzt vor vor 1 Woche, 1 Tag von
aktualisiert.
-
Thema
-
Dies ist der Diskussions-Thread zum Blog-Eintrag: Philips TV Firmware Archiv / Previous Firmware Versions.
-
Antworten
-
benötige dringend für einen 32PFL7603D/12 eine SW älter als 0.64.79.0. TV hängt im Update-Menü. kein Beschreiben mit 0.64.79.0 möglich. Fehler mit Abbruch
Suche die alte Version QM163E_U_0.15.209.1 für das 2016 Modell 6401. Bei der aktuellen Version ist das Vorspulen von Filmen via USB Platte (durch halten der Vorspultaste) deutlich verlangsamt.
danke!
Hi!
Aren’t older firmware versions available? With the stupid newest version the philips TVs are freezing all the time with 6162 series TVs. (I have a PUS506162)
TPM177E_012.002.070.001 seemed to working fine, but it’s impossible to find… :(
Thank you very much!
Can you tell me if I can use the normal update process? ( https://toengel.net/philipsblog/2011/02/03/philips-firmware-downgrade-anleitung/ )
Or do I need to use one of these?:
Which one? Is the firmware Android based? I can’t tell. And if such do I must to use “update 9”
Hi,
no – you don’t have Android… So you need to do it via the buttons on the back of your TV…
Toengel@Alex
So I can use the original guide? ( http://www.supportforum.philips.com/en/showthread.php?966-Is-there-a-Guaranteed-way-to-downgrade-140.XX-software&p=3176&viewfull=1#post3176 )
Wait… “Update 6” says the TV button is for Android TVs and the original guide says to use the remote control. So I need to use the original steps but with the TV button instead of the remote?
Sorry to keep bothering you, but I don’t want to mess this up and end up with no TV.
Thanks again! It seems like you’re the only one on the internet who can help. :)
Hi!
So I tried both the remote and the button on the TV but neither brought up a firmware update/downgrade menu. The TV button switched the TV on then immediately off. Pressing “down” on the remote blinked the led for a while then the LED stopped blinking and stayed off. (If I did it again the LED blinked again for a while then stayed on after. ) But nothing else, when I pressed the on button on the remote it started normally.
Should I use the normal firmware update from usb mode then? Or would that be fatal?
I decided to risk it, with the normal method. The update process successfully completed, and the TV works. (at first the TV froze when I had to “OK” the update process. But with this TV and its crappy FW it’s not surprising)
Thanks! Hopefully the freezing will stop now.
Thanks for all the help!
Hello!
Can I get a link for:
QM152E_000.005.255.171Thanks!
Sorry!
Can I get a link for:
QM152E_000.005.255.114Thanks!
