Philips: Neue Firmware für 2013/2014/2016/2017er FullHD TV-Modelle mit Android TV 7 (QM164E: 16.102.24)

Erfahrungen, Feedback und Bugmeldungen zu einzelnen Firmware-Versionen
  • 2017: 32PFS6402
  • 2016: 5501, 32PFS6401
  • 2013: xxPFL6008S/R1, xxPFL61x8S/R1, xxPFL6678S/R1, xxPFL7x08S/R1
Ansicht von 15 Antworten – 16 bis 30 (von insgesamt 40)
  • Autor
    Antworten
  • #184895 Antworten
    Sergee

      Erstmal Danke, für die schnelle Antwort.

      Also habe mir, das ganze auf nen Stick gepackt und da kam auch direkt, dass er die Sofwarte Updatet, leider geht das ganze irgendwann aus und es kommt nur ein schwarzer Bildschirm.

      Jetzt ist es so, wenn ich starte kommt das Philips Zeichen für paar Sekunden und dann wird der Bildschirm wieder schwarz und die Rote Standby LED blinkt einfach ganze die Zeit.

      Hast du noch eine Idee oder kann ich es auf eigenem Weg vergessen?

      Schönen Gruß

      #184896 Antworten
      Toengel
      Administrator

        Tachchen,

        kommst du ins Android Recovery Menü?

        Toengel@Alex

        #184897 Antworten
        Sergee

          Ja, da bin ich gestern irgendwie rein gekommen :D

          Denke kriege ich wieder hin.

          #184898 Antworten
          Toengel
          Administrator

            Tachchen,

            mach dort wipe cache und installiere dort das neueste normale update nochmal…

            Toengel@Alex

            #184899 Antworten
            Sergee

              Ok, danke für die Info, das werde ich mal testen.

              Danke schon mal.

              #184901 Antworten
              Sergee

                Komme irgendwie nciht mehr ins Recovery Menü rein.

                Mache ich was falsch? Stecker raus, nach unten drücken, Stecker rein und halten und warten?

                #184902 Antworten
                Sergee

                  So, habe jetzt hin gekriegt ins Menü zu kommen, aber beim wipe und beim Update zeigt er mir immer an.

                  Failed to Mount Cache /

                  Failed cant open /

                  #184903 Antworten
                  Sergee

                    Hier mal ein Foto vom ganzen.

                    bild

                    #184985 Antworten
                    Sergee

                      Hallo,

                      hier mal mein Log

                      == Error open /dev/cb2 == !
                      Failed to CB2_InitLib !
                      SC_FCT_0: sched_getparam 882 error -1
                      SC_FCT_0: sched_getparam 904 error -1
                      SC_FCT_0: sched_getparam 905 error -1
                      set ethernet port power to down return 0
                      __bionic_open_tzdata: couldn’t find any tzdata when looking for GMT!
                      Starting MAIN recovery (pid 965) on Sat Jan 1 16:00:48 2000
                      recovery filesystem table
                      =========================
                      0 /sdcard vfat /dev/block/sda1 0
                      1 /system ext4 /dev/block/mmcblk0p6 0
                      2 /cache ext4 /dev/block/mmcblk0p8 0
                      3 /data ext4 /dev/block/mmcblk0p7 0
                      4 /factory_setting ext4 /dev/block/mmcblk0p9 0
                      5 /user_setting ext4 /dev/block/mmcblk0p16 0
                      6 /perm ext4 /dev/block/mmcblk0p9 0
                      7 /recovery emmc /dev/block/mmcblk0p4 0
                      8 /misc emmc /dev/block/mmcblk0p3 0
                      9 /boot emmc /dev/block/mmcblk0p5 0
                      10 /pq emmc /dev/block/mmcblk0p10 0
                      11 /aq emmc /dev/block/mmcblk0p11 0
                      12 /uboot_env emmc /dev/block/mmcblk0p2 0
                      13 /loader emmc /dev/block/mmcblk0p1 0
                      14 /tmp ramdisk ramdisk 0

                      I:Boot command: boot-recovery
                      I:Got arguments from boot message
                      locale is [en_GB]
                      stage is []
                      cannot find/open a drm device: No such file or directory
                      fb0 reports (possibly inaccurate):
                      vi.bits_per_pixel = 32
                      vi.red.offset = 16 .length = 8
                      vi.green.offset = 8 .length = 8
                      vi.blue.offset = 0 .length = 8
                      framebuffer: 0 (1920 x 1080)
                      erasing_text: en_GB (88 x 38 @ 975)
                      no_command_text: en_GB (166 x 38 @ 975)
                      error_text: en_GB (63 x 38 @ 975)
                      Command: “recovery” “–wipe_data”

                      ro.nrdp.validation=ninja_4
                      sys.droidtv.wakeup_reason=COLD_BOOT
                      sys.droidtv.wakeup_details.init=1
                      sys.droidtv.target_bootlevel=Recovery
                      ro.dalvik.vm.native.bridge=0
                      dalvik.vm.isa.arm.variant=cortex-a7
                      dalvik.vm.isa.arm.features=default
                      dalvik.vm.usejit=true
                      dalvik.vm.heapsize=512m
                      dalvik.vm.dex2oat-Xms=64m
                      dalvik.vm.dex2oat-Xmx=512m
                      dalvik.vm.heapmaxfree=8m
                      dalvik.vm.heapminfree=512k
                      dalvik.vm.heapstartsize=16m
                      dalvik.vm.appimageformat=lz4
                      dalvik.vm.usejitprofiles=true
                      dalvik.vm.heapgrowthlimit=192m
                      dalvik.vm.stack-trace-file=/data/anr/traces.txt
                      dalvik.vm.image-dex2oat-Xms=64m
                      dalvik.vm.image-dex2oat-Xmx=64m
                      dalvik.vm.heaptargetutilization=0.75
                      ro.config.low_mem=true
                      ro.config.ringtone=Ring_Synth_04.ogg
                      ro.config.alarm_alert=Alarm_Classic.ogg
                      ro.config.notification_sound=pixiedust.ogg
                      ro.build.fingerprint=PHILIPS/QM16XE_F/QM16XE_F:7.1.2/NZH54D/016563:user/test-keys
                      pm.dexopt.boot=verify-profile
                      pm.dexopt.ab-ota=speed-profile
                      pm.dexopt.install=interpret-only
                      pm.dexopt.core-app=speed
                      pm.dexopt.bg-dexopt=speed-profile
                      pm.dexopt.first-boot=verify-at-runtime
                      pm.dexopt.shared-apk=speed
                      pm.dexopt.nsys-library=speed
                      pm.dexopt.forced-dexopt=speed
                      ro.pm.warmboot=1
                      ro.sf.lcd_density=213
                      ro.adb.secure=1
                      ro.com.google.gmsversion=N_preview
                      ro.mtk.pip.fullscreen=0
                      ro.mtk.4k2k.photo=1
                      ro.mtk.camera.facingback=0
                      ro.mtk.system.ci.existed=1
                      ro.mtk.system.dmv=0
                      ro.mtk.system.mhp.existed=1
                      ro.mtk.system.ttx.existed=1
                      ro.mtk.system.vss.existed=0
                      ro.mtk.system.tkui=0
                      ro.mtk.system.mheg5.existed=1
                      ro.mtk.system.subtitle.existed=1
                      ro.mtk.system.audiosync=1
                      ro.mtk.system.marketregion=cn
                      ro.mtk.system.av_record_lib=1
                      ro.mtk.twoworlds=0
                      ro.mtk.pkg_version=IDTV1501_368_001_233_001_269_001_363
                      ro.mtk.disable_scrn_rt=1
                      ro.mtk.isSupportHwVenc=1
                      ro.mtk.sys_driver_only=1
                      ro.mtk.hide_navigation_bar=1
                      ro.url.safetylegal=https://www.google.com/policies/privacy/
                      ro.boot.mode=mainrec
                      ro.boot.hardware=mt5861
                      ro.boot.serialno=000070af24456d22
                      ro.hdmi.device_type=0
                      ro.hwui.path_cache_size=8
                      ro.hwui.layer_cache_size=32
                      ro.hwui.texture_cache_size=48
                      ro.hwui.disable_scissor_opt=true
                      ro.hwui.gradient_cache_size=1
                      ro.hwui.r_buffer_cache_size=4
                      ro.hwui.drop_shadow_cache_size=4
                      ro.hwui.text_large_cache_width=2048
                      ro.hwui.text_small_cache_width=1024
                      ro.hwui.text_large_cache_height=512
                      ro.hwui.text_small_cache_height=256
                      ro.hwui.texture_cache_flushrate=0.4
                      ro.wifi.channels=
                      ro.allow.mock.location=0
                      ro.board.platform=mt5861
                      ro.build.id=NZH54D
                      ro.build.date=Tue Feb 13 21:10:18 IST 2018
                      ro.build.date.utc=1518536418
                      ro.build.host=inblrlx047
                      ro.build.tags=test-keys
                      ro.build.type=user
                      ro.build.user=build_ci
                      ro.build.flavor=QM16XE_F-user
                      ro.build.display.id=NZH54D test-keys
                      ro.build.product=QM16XE_F
                      ro.build.version.sdk=25
                      ro.build.version.asta.sdk=2
                      ro.build.version.base_os=
                      ro.build.version.release=7.1.2
                      ro.build.version.codename=REL
                      ro.build.version.incremental=eng.build_.20180213.211018
                      ro.build.version.preview_sdk=0
                      ro.build.version.all_codenames=REL
                      ro.build.version.security_patch=2017-12-05
                      ro.build.description=QM16XE_F-user 7.1.2 NZH54D eng.build_.20180213.211018 test-keys
                      ro.build.characteristics=default
                      ro.secure=1
                      ro.zygote=zygote32
                      ro.carrier=unknown
                      ro.product.cpu.abi=armeabi-v7a
                      ro.product.cpu.abi2=armeabi
                      ro.product.cpu.abilist=armeabi-v7a,armeabi
                      ro.product.cpu.abilist32=armeabi-v7a,armeabi
                      ro.product.cpu.abilist64=
                      ro.product.name=QM16XE_F
                      ro.product.board=QM16XE_F
                      ro.product.brand=PHILIPS
                      ro.product.model=QM164E
                      ro.product.device=QM16XE_F
                      ro.product.locale=en-GB
                      ro.product.manufacturer=PHILIPS
                      ro.product.first_api_level=22
                      ro.baseband=unknown
                      ro.bootmode=mainrec
                      ro.hardware=mt5861
                      ro.opengles.version=131072
                      ro.revision=0
                      ro.serialno=000070af24456d22
                      ro.tpvision.product.id=QM164E
                      ro.tpvision.product.hwboard=2K16EU1
                      ro.tpvision.product.swversion=QM164E.0.16.56.3
                      ro.bootimage.build.date=Tue Feb 13 21:10:18 IST 2018
                      ro.bootimage.build.date.utc=1518536418
                      ro.bootimage.build.fingerprint=PHILIPS/QM16XE_F/QM16XE_F:7.1.2/NZH54D/016563:user/test-keys
                      ro.bootloader=unknown
                      ro.debuggable=0
                      ro.recovery_id=0xf7815688e60afa442fc45c3ef674ee56d77fa199000000000000000000000000
                      ro.setupwizard.mode=OPTIONAL
                      ro.def_systemui_existed=0
                      ro.cts_test_with_systemui=1
                      drm.service.enabled=true
                      mtk.omx.vdp=1
                      mtk.omx.verbose.log=0
                      mtk.pms.suspend_wait_timeout=10
                      mtk.video.display=2k
                      mtk.inside=1
                      mtk.browser.lowMemoryMode=0
                      mtk.browser.useCmpbPlayer=0
                      mtk.browser.skipUABlackList=0
                      mtk.browser.alwaysFullscreen=0
                      mtk.browser.openLinkInSameTab=1
                      mtk.browser.freePlayerWhenPause=0
                      mtk.disable.screen.lock=1
                      mtk.cts_test=0
                      mtk.auto_test=0
                      mtk.stress_test=0
                      mtk.tms_support=0
                      mtk.isSupportMHL=1
                      mtk.awesomePlayer.dumpbs=0
                      mtk.isOnlyCableAtv=1
                      mtk.bgm_custom_flow=0
                      mtk.boot_log_needed=0
                      mtk.mtk_wfd_support=1
                      mtk.isSetDtmbGUILang=0
                      mtk.mtk_hdmi_support=0
                      mtk.mtk_dx_hdcp_support=0
                      mtk.mtk_wfd_sink_support=1
                      mtk.mtk_wfd_hdcp_tx_support=0
                      mtk.multi_screen_interaction=1
                      mtk.no_long_press_do_standby=1
                      mtk.mtk_wfd_sink_uibc_support=0
                      png.hw.threshold=512000
                      use.cmpb.in.gallery=0
                      init.svc.logd=running
                      init.svc.console=running
                      init.svc.healthd=running
                      init.svc.ueventd=running
                      init.svc.recovery=running
                      init.svc.recovery_config=stopped
                      wifi.interface=wlan0
                      media.wfd.sink.uibc.cap=NONE
                      media.wfd.sink.uibc-enabled=0
                      security.perf_harden=1
                      debug.atrace.tags.enableflags=0
                      net.bt.name=Android
                      net.change=net.bt.name
                      net.qtaguid_enabled=0
                      sys.pm.warmboot=1
                      sys.pm.warmboot.flag=0
                      sys.mtk.keyDisable=0
                      sys.vold.autoflag=1
                      persist.sys.usb.config=none
                      persist.sys.dalvik.vm.lib.2=libart.so
                      persist.sys.strictmode.visual=0
                      persist.sys.strictmode.disable=1

                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1
                      MTEEPROM_Read() fail, ret=-1

                      — update_package: /system/etc/virgin/wipedatatool.zip

                      — Wiping data…
                      cp: /system/etc/virgin/wipedatatool.zip: No such file or directory
                      cp: bad ‘/system/etc/virgin/wipedatatool.zip’: No such file or directory
                      Performing Virgin Installation ..
                      Opening update package…
                      sysutil: Unable to open ‘/tmp/wipedatatool.zip’: No such file or directory
                      no File Exists installstatus.txt
                      function install_package — returniing result = 2
                      elapse time = 73710 us ..
                      Data wipe failed.
                      E:Error in /cache/recovery/log
                      (I/O error)
                      E:Can’t open /cache/recovery/last_log
                      E:Can’t open /cache/recovery/last_install
                      copy recovery logs to sdcard ..
                      show_text is 1 —
                      E:Can’t open /cache/recovery/last_locale
                      E:Can’t open /cache/recovery/log
                      E:Can’t open /cache/recovery/last_log
                      E:Can’t open /cache/recovery/last_install
                      copy recovery logs to sdcard ..
                      MTEEPROM_Write() fail, ret=-1
                      Clear recovery crash count failed
                      MTEEPROM_Write() fail, ret=-1
                      Clear crash count failed
                      W:Can’t unlink /cache/recovery/command
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory

                      — Wiping cache…
                      E:failed to mount /cache (Invalid argument)
                      Formatting /cache…
                      Creating filesystem with parameters:
                      Size: 1073741824
                      Block size: 4096
                      Blocks per group: 32768
                      Inodes per group: 8192
                      Inode size: 256
                      Journal blocks: 4096
                      Label:
                      Blocks: 262144
                      Block groups: 8
                      Reserved block group size: 63
                      Created filesystem with 11/65536 inodes and 8536/262144 blocks
                      warning: wipe_block_device: Discard failed

                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_install
                      E:failed to mount /sdcard (No such file or directory)
                      ensure_path_mounted_2 :Could not mount /dev/block/sda : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sda1 : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sdb1 : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sdb : error No such file or directory
                      Cache wipe complete.
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_locale
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_install
                      E:failed to mount /sdcard (No such file or directory)
                      ensure_path_mounted_2 :Could not mount /dev/block/sda : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sda1 : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sdb1 : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sdb : error No such file or directory
                      MTEEPROM_Write() fail, ret=-1
                      Clear recovery crash count failed
                      MTEEPROM_Write() fail, ret=-1
                      Clear crash count failed
                      E:failed to mount /cache (Invalid argument)
                      W:Can’t unlink /cache/recovery/command
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      E:failed to mount /sdcard (No such file or directory)
                      ensure_path_mounted_2 :Could not mount /dev/block/sda : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sda1 : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sdb1 : error No such file or directory
                      ensure_path_mounted_2 :Could not mount /dev/block/sdb : error No such file or directory
                      Could not mount the usb device
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory

                      — No package file selected.
                      Installation aborted.
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_install
                      copy recovery logs to sdcard ..
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_locale
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_install
                      copy recovery logs to sdcard ..
                      MTEEPROM_Write() fail, ret=-1
                      Clear recovery crash count failed
                      MTEEPROM_Write() fail, ret=-1
                      Clear crash count failed
                      E:failed to mount /cache (Invalid argument)
                      W:Can’t unlink /cache/recovery/command
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory
                      failed to open /sys/class/android_usb/android0/state: No such file or directory

                      — Install /sdcard/autorun_QM164E_000.016.102.024.upg …
                      E:failed to mount /cache (Invalid argument)
                      Installation aborted.
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_install
                      copy recovery logs to sdcard ..
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_locale
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_log
                      E:failed to mount /cache (Invalid argument)
                      E:Can’t open /cache/recovery/last_install
                      copy recovery logs to sdcard ..

                      #184989 Antworten
                      Toengel
                      Administrator

                        Tachchen,

                        der TV kommt nicht auf den internen Speicher…

                        1) nochmal upgrade_loader probieren (ggf. auch mal einen älteren)
                        2) Speicher ist defekt

                        Toengel@Alex

                        #184990 Antworten
                        Sergee

                          Danke dir auf jeden fall, werde ich mal testen.

                          #186197 Antworten
                          Vic

                            Hallo

                            Ich möchte mit dem TV 32PFS6402/12 nur fernsehen. Habe keine Apps geladen usw. Jetzt kommt ständig eine Meldung etwa “nicht genügend Speicher”. Es wird ein Menü angegeben, in welchem man was löschen soll. Das Menü gibt es aber nicht.

                            Frage:
                            Wie kann ich den TV leer machen damit die Meldung nicht mehr kommt?
                            Wie kann ich den TV dazu bringen, dass er nur TV ist und sich nicht selbst mit irgend etwas voll lädt?

                            Danke für die Hilfe

                            #186201 Antworten
                            Toengel
                            Administrator

                              Tachchen,

                              mal TV vom Strom genommen? Wahrscheinlich sollst du unter Android->Apps ein paar Programme entfernen. Du kannst dort auch von Apps den Cache löschen…

                              Toengel@Alex

                              #186261 Antworten
                              Fabio

                                Ciao, ho il tuo stesso problema con un 55PFL7008S/12 aggiornato nel 2018 a 55PFL7008/R1, ha funzionato bene sino a ieri, oggi si accende ma rimane piantato con il logo Philips e il led rosso lampeggia. solo un paio di volte mi è apparso il menu di recovery android, ho pulito la cache, ho lanciato l’aggiornamento ma si è bloccato con un errore. Te hai risolto? In che modo?
                                Grazie

                                #197805 Antworten
                                Micha

                                  Hallo Sergee , konntest Du schon eine Lösung finden.
                                  oder Frage @Alex

                                  Habe einen 60PFL8708S/12 defekt gekauft mit Hardware Kit 42PFL6008S/R1.
                                  Philips Logo erscheint bleibt stehen oder verschwindet nach 10 Sec.
                                  Reagiert weder auf FB noch auf Bedienfeld Abdeckung hinten.
                                  QM164E pkg.Loader wird zwar angenommen. “Update in progress” läuft dann 5min startet neu und fängt wieder an.
                                  Diesesmal 20 min. Dannach startet neu Logo erscheint und verschwindet dann.Backlight leuchtet nur.
                                  LED Vorne pulsiert an und aus permanent.
                                  Ich frage mich ist der NAND Speicher beschädigt oder mache ich etwas falsch ich weiß nicht mehr weiter.
                                  Bitte um Hilfe
                                  Grüße Micha

                                Ansicht von 15 Antworten – 16 bis 30 (von insgesamt 40)
                                Antwort auf: Philips: Neue Firmware für 2013/2014/2016/2017er FullHD TV-Modelle mit Android TV 7 (QM164E: 16.102.24)
                                Deine Informationen:




                                Die Kommentieren ist durch reCAPTCHA geschützt und es gelten die Datenschutzbestimmungen und Nutzungsbedingungen von Google.

                                Toengels Philips Blog via WhatsApp-Kanal folgen (Bild antippen/anklicken)!

                                WhatsApp Logo

                                Join Toengels Philips Blog on the new WhatsApp channel (tap/click image)!