- Dieses Thema hat 212 Antworten sowie 2 Teilnehmer und wurde zuletzt vor vor 3 Stunden, 6 Minuten von
aktualisiert.
-
Thema
-
Tachchen, hier folgen alle Informationen zu den 2018er Philips Ultra HD OLED TV-Modellen/-Fernsehern mit HDR und Android TV der Serie 803. Weitere Inf
[Vollständiger Blog-Eintrag: Philips 2018: Der 55OLED803 und 65OLED803 OLED Ultra HD TV mit Android TV]
-
Antworten
-
Tachchen,
such auf eBay nach einem TV mit Panelschaden… oder du suchst ein SSB vom 903…
Toengel@Alex
Hi there Toangel and fellas, have gotten into an issue after having a low voltage outage, my OLED803 is not turning on and the led red light is blinking without a visible pattern. Some years ago with the same exact low voltage outage I had it repaired in a single day, now in the same service they ask for a mainboard replace for a whopping 750 euros.
My initial thinking is that as I am from a small rural area in Greece that they didn’t replace the mainboard but fixed it rather easily by synchronizing the TCON somehow as having the specific mainboard in such place is unlikely, power reset (holding the power button, didn’t work) any idea what can I do? Maybe disconnect the tcon and do a power cycle then flash the firmware from the .bin again?
Or any other ideas?
@Toengel, it was My USB STICK that needed to be formated to sub 8GB, and a combination of holding the joystick on the down position when plugging the power cord(maybe? it wasn’t booting otherwise).
I had already received the “N V M.BIN” and it managed to get flashed, the TV is fixed.
Thanks a lot!
Your help and contribution of the required file was great.
This TV is notoriously easy to get in safe mode after power outages, I hope the device will live for another 2-3 years.
Hi Toengel,
I’ve been trying to recover an OLED803/12 for a good number of weeks now which is suffering from a stuck Philips logo. I have tried the most recent Upgrade_Loader.pkg (107.1.143.0), (107.1.136.3) and (107.1.132.0), without bootup success yet. “Software Upgrade in progress” is displayed, but does not complete.
I read the boot log via Uart connection and noted that 107.1.143.0 was calling for missing BIN files “..nt334_2k18”. Should these be present inside the zip as they are with the older zip files?
Lastly, I’d really like to try flashing the NVM.bin file for this set. Would you be able to share this with me too?
Many thanks for all your help and advice.
JB
Hi,
just copy all files from the upgrade_loader.zip version 107.1.136.3 together with the latest upgrade_loader.pkg (version 171.1.143.0) on the usb stick…
Drop me an email regarding NVM file together with a photo of the sticker on the back of your TV.
Toengel@Alex
Hallo an alle,
Ich habe eine Frage zu meinem 55OLED803/12..
Innerhalb der letzten 4 Wochen haben sich alle meine HDMI Anschlüsse nacheinander “verabschiedet”. Sobald ich etwas anschließe wird dies im Menü erkannt (zb FireTV) – sobald ich allerdings auf die Quelle gehe wird kein Bild übertragen (bei allen 4 Anschlüssen). Mein Soundsystem sld Beispiel (via HDMI mit Bluerayplayer) wird erkannt und darüber auch der Ton ausgegeben.
Ich den TV bereits komplett zurück gesetzt und neu installiert über das Menü – ohne erfolg). Die installierte Firmware ist die Version: TPM171E_R.107.001.143.000
Macht es vielleicht Sinn einmal downzugraden?
Alles andere funktioniert einwandfrei am Fernseher.
Ich habe noch einen 55OLED935/12 mit vermutlich einem defekten Panel hier.. War schon versucht die Innereien 1zu1 zu tauschen und den vielleicht mit dem Panel vom 803 zu betreiben.. Habe allerdings Angst, dass ich dann auch den 803 vollends zerstöre ^^
Viele Grüße
Daniel
Tachchen,
du könntest mal loggen, ob was zu sehen ist:
Philips: Logs am TV-Service-Port (SERV.U) mithilfe eines USB-UART-Adapters auslesen (Anleitung)
Kannst du ja bei beiden TVs machen… dann kann man ggf. den 935 noch retten…
Mixen würde ich den 803 und 935 nicht, da es unterschiedliche Generationen sind.
Toengel@Alex
So habe ich jetzt mal alles bestellt und werde versuchen am Dienstag die TVs mal zu loggen :)
Bis dahin – hab eine schöne Zeit!
Can anybody please help, I am a bit stuck at the moment.
Oled 803/12 EU model is stuck on Philips logo. TV power led is not showing anything.
I got the upgrade_loader_TPM171E_R.107.001.143.000.zip from Philips. Zip contains only one file: upgrade_loader.pkg
Used USB2 and Fat32 stick, used USB2 port, limited size to 4gb and also 8gb – nothing works.
Tried all the reset tricks with the button and power off on etc. nothing works.
TV starts the loading upgrade text, but that is stuck forever on the screen, and nothing happens.
I have seen that a couple of people have had issues that some files could be missing from the .pkg.
I downloaded one file from here, but it was a .upg file. I have no idea what to do with that.
How to proceed? I saw some suggestions to use a older .pkg file but I can not find any older ones. Only the 107.001.143.000 is available everywhere.
Hi,
TV starts the loading upgrade text, but that is stuck forever on the screen, and nothing happens.
this takes around 20 minutes… just wait…
And you need the upgrade_loader.pkg – not the autorun.upg
Toengel@Alex
Thanks for the reply. I have waited for 20min, 30mins, 1hour, 8hours. Every time in front of the tv (except 8h) to see if it finishes so i could pull out the usb, but nothing has happened.
Could it be a bigger problem as the led of the tv is not showing red or anything, not blinking etc.
Where could I get an older sw/fw version to try to install?
Hello,
Yes, the message is displayed on the screen.
I tried also the upgrade_loader.pkg which was available to download from here and still the same result.
Philips support replied to me when asking what to do next, that tough luck, take it to a repair shop next.
Some reddit user had same issue with a different model and he got things working by using a ._upgrade_loader.pkg-file. What is that?
Reddit comment:
“Never mind, all good… It seams like I needed to copy both files: ._upgrade_loader.pkg AND upgrade_loader.pkg