Schau mal in den Testberichten nach, da schreiben manche die besten Einstellungen hin. Ansonsten mal googeln nach dem Modell und bestes Bild o.ä.

MfG

Hallo, habe einen 42 PFK 6309, der sich seit heute nicht mehr üver die FB einschalten läßt! Batterian sind ok., aber wo liegt das Problem? Oder gibt es eine Möglichkeit, die Einschaltung und Grundfunktionen wie Senderwahl, Lautstärke usw. direkt am Gerät vorzunehmen? Habe leider nach über 2 Jahren auch die
Bedienungsanleitung nicht mehr zur Hand!

42PFH6309/99 CONSTANTLY REBOOTS / TERMINAL OUTPUT

DRAM Channel A Calibration.
1T = (123 – 6) = 117 delay cells
Clock frequency = 675 MHz, Clock period = 1481 ps, 1 delay cell = 12 ps
Byte 0 : Gating(-51 ~ 52), Size=104.
Byte 1 : Gating(-53 ~ 54), Size=108.
Byte 2 : Gating(-56 ~ 57), Size=114.
Byte 3 : Gating(-56 ~ 57), Size=114.
final DQS0 Coarse 0.5T = 8
final DQS0 Coarse 0.5T = 7
final DQS0 Coarse 0.5T = 8
final DQS0 Coarse 0.5T = 8
final DQS0 fine tune = 4
final DQS0 fine tune = 56
final DQS0 fine tune = 17
final DQS0 fine tune = 9
HW Byte 0 : DQS(8 ~ 40), Size 33, Set 23, HW_Set 25.
HW Byte 1 : DQS(8 ~ 39), Size 32, Set 22, HW_Set 25.
HW Byte 2 : DQS(10 ~ 36), Size 27, Set 23, HW_Set 25.
HW Byte 3 : DQS(14 ~ 37), Size 24, Set 25, HW_Set 26.
DRAM A Size = 1024 Mbytes.
Boot
Start Pmain
0x0000a000
EMMC boot

CID:0xc5fd1175
:0x5814c03f
:0x31585858
:0xfe014e50
LZHS addr:0x00100040
LZHS size:0x0020a7c8
LZHS checksum:0x000000a4
Boot
Start Lmain

MT5880 Boot Loader v0.9
fgDisableDimLock set to TRUE

SIF_Master0: new design

[ITM]====send value start!!=====U▒U
[ITM]Time out:50 ms ===>break now!

[ITM]===no ITM start command received,clear flag now!!===]

[ITM]===no ITM start command received,clear flag done!!===]
Find panel index 64 from EEPROM

Change LVDS Sel 0 by panel idx:64
Boot reason: Watch dog0 reset (0x1000000)
!![PDWNC] PDWNC_PHILIPS_ReadWakeupReason: 33 (status 0x0)
[EDID Info] Update EDID from NVM to SRAM…mode : 2

Load VGA internal EDID……………..
Load HDMI internal EDID (SRAM)……………..
EDID Table:……………..
0 ff ff ff ff ff ff 0
41 c 0 0 1 1 1 1
4 18 1 3 80 40 24 78
a f9 ab a2 55 4a 9a 25
f 47 4a 21 8 0 81 80
1 1 1 1 1 1 1 1
1 1 1 1 1 1 2 3a
80 18 71 38 2d 40 58 2c
45 0 80 68 21 0 0 1e
1b 21 50 a0 51 0 1e 30
48 88 35 0 80 68 21 0
0 18 0 0 0 fc 0 50
48 49 4c 49 50 53 20 46
54 56 a 20 0 0 0 fd
0 38 4c 1e 53 11 0 a
20 20 20 20 20 20 1 cb
2 3 39 71 4d 9f 10 20
21 14 5 13 4 11 2 15
6 1 29 9 7 3 15 7
50 3d 7 c0 83 1 0 0
78 3 c 0 10 0 b8 2d
20 c8 e 1 41 0 fc 20
30 60 70 28 10 38 10 68
10 2 3a 80 d0 72 38 2d
40 10 2c 45 80 80 68 21
0 0 1a 1 1d 80 3e 73
38 2d 40 7e 2c 45 80 80
68 21 0 0 1e 1 1d 80
d0 72 1c 16 20 10 2c 25
80 80 68 21 0 0 9e 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 b2
CEC Physical offset 164
HDMI1 Physical adr 0x10
HDMI1 PA 0x10
HDMI1 checksum 0xb2
HDMI2 PA 0x10
HDMI2 checksum 0xb2
HDMI3 PA 0x20
HDMI3 checksum 0xa2
HDMI4 PA 0x30
HDMI4 checksum 0x92
[EDID Info] Update EDID Finish…
Init WiFi and RF4CE
IR DATA register : 0x 0
T8032 init A/C on case loader stage…
Load T8032 FW (addr: 0x d50954, size: 24576)success!!
T8032 FW version: 9
T8032 change to loader stage…
LDR_FlashCopy 0xf010 0x7be80 0x80
(SDR)Request Clk:24MHz Bus Clk:24MHz, SelVal:7
fgD
[ITM]====send value start!!=====U▒U
[ITM]====checked already, continue boot!======
1st MAC in EEP is invalid! (00:00:00:00:00:00)
Both MAC in EEP is invalid! Need write by cli mac
1st : (00:00:00:00:00:00), checksum(00) error
2nd : (00:00:00:00:00:00), checksum(00) error
EEPEtherMAC_Read() fail -1
Use default Eth MAC address: 00:0c:e7:06:00:00
[PDWNC] Current state : 0x1
[PDWNC]PDWNC_PHILIPS_DetermineNextState : u4Event = 0x21
PDWNC_PHILIPS_DetermineNextState : u4Current = 1
PDWNC_PHILIPS_DetermineNextState : event = PDWNC_POWER_DOWN_UNKNOWN
Current = 0x1, Event = 0x21, Next = 0x1
[PDWNC] PDWNC_PHILIPS_EnterNextState : u4Next = 0x1
[PDWNC]PDWNC_ReadWakeupReason = 0x21
[PDWNC]Enter normal mode, LED changes to normal
PDWNC_Init
[Knight]SetWorkMarkBrightness:type:4, mode=0, level:2(duty cycle:30)
Debug message:loader_panel.c,ReadTimeHoursMins,271,Total time offset:0
Debug message:loader_panel.c,ReadTimeHoursMins,272,b_min:0
Debug message:loader_panel.c,ReadTimeHoursMins,273,u1_minus:0
ReadTimeHoursMins (HH/MM) = 16/0
TimerOsdInits Done
Display 0x00f1c2cc background:0x00000000
Find panel index 64 from EEPROM

Change LVDS Sel 0 by panel idx:64

OSD_SetPlaneSwitchOrder[0,1,2],Switch[1,2,3]
———- [SA7] vErrorHandleInit ———-
[SA7] Error handling init
[SA7] PANEL_GetPanelWidth=0x780, PANEL_GetPanelHeight=0x438 , wDrvGetOutputHTotal=0x898 , wDrvGetOutputVTotal=0x465
[SA7] PANEL_GetHTotalMax=0x960, PANEL_GetHTotalMin=0x848, PANEL_GetVTotalMax=0x564, PANEL_GetVTotalMin=0x44c
[SA7] PANEL_GetPixelClkMax=156000000, PANEL_GetPixelClkMin=126000000
[SA7] PANEL_GetPixelClk60Hz = 0x8d9ee20
———- [SA7] vErrorHandleSetByTiming ———-
[SA7] u2HSyncWidth=260, u2HSyncStart=1930, u2VSyncWidth=26, u2VSyncStart=1094
———- [SA7] vErrorHandleSetByTiming end———-
———- [SA7] vErrorHandleSetByPanel end———-
[SA7] vDDDSInit
———- [SA7] vErrorHandleSetByTiming ———-
[SA7] u2HSyncWidth=30, u2HSyncStart=1936, u2VSyncWidth=3, u2VSyncStart=1119
———- [SA7] vErrorHandleSetByTiming end———-
vDrvSetOCLKClockSchemaInit.
[SA7] _fgVopllUseDDDS = True
[LVDS] VOPLL Initialize successful !
vDrvInitSCANPWM: SV_OFF
DEFAULT_DIMMING_FREQUENCY u4Frequency is 1300
[LVDS][backlight] DeltaTime=1896273 us, BLOnDelay=690000 us
[LVDS][backlight] GPIO:203, value=0, temp=0xcb
LDR_OsdDisplay(14, 0x35ccb000, 1280, 291)
Color:14 BmpAddr:0x35ccb000 Width:1280 Height:291
OSD_UpdateTiming
OSD_Base_SetHStart[h=0x2cb,v=0x9]
Panel 1920 x 1080

*************u4BmpPitch=5120******************
OSD_RGN_Create ok u4Region=0
u4OutWidth=1280,u4OutHeight=291,u4OutX=320,u4OutY=394.

OSD_SetPlaneSwitchOrder[0,1,2],Switch[1,2,3]
LDR_PostInit

Do USB upgrade
USB: Vbus turn up time = 760 ms, Max =0 ms.
USB-1: insert.
USB-1: ClassCode= 0xff, u4Diff=156 ms.

No USB device.
USB upgrade stop
_LdrSetUpgradeBit :save Custom quiet boot flag: off

Flash load lzhs header from 0x100000 to dram(0x1d06280), size=2048
Decompression uboot to 0x00800000…

Flash load image from 0x100000 to dram(0x1d06280), size=0x397f2

Flash load tz from 0x223e26(part_4) to dram(0x3ee00000), size=0x32c3a
secure boot ok
LZHS start
LZHS done
secure boot ok
LZHS start
LZHS done

Reboot Finished!

▒
Reboot Finished!

U-Boot 2011.12.12 (Feb 15 2017 – 14:14:04)

DRAM: 806.7 MiB
WARNING: Caches not enabled
MMC: aes init success!
HOST 1
Dev Num: 0, Timing Position: 0, Sample Edge: 0x00
FE014E50:31585858:5814C03F:C5FD1175
id1:4E503158 id2:58585814
eMMC Name: MTFC4GMCDM-1M WT
Dev Num: 10, Timing Position: 1, Sample Edge: 0x00
Dev Num: 10, Timing Position: 2, Sample Edge: 0x11
: 0

0.0.0.0
In: serial
Out: serial
Err: serial
Boot from kernelA and rootfsA(partition 7)
Net: init MMAC driver
ethernet internal PHY init successful!
priv : 0x006e5890
Mmac::PhyAddr=0
Mmac::initialize
Net Initialization Skipped
8
Warning: failed to set MAC address

Hit any key to stop autoboot: 0
Partition rootfsA defined at mtdparts:
ID:6, Offset:0x00000000, Size:0x00b00000
MSDC INT(0xF006D00C) not 0:0x00002000 !!
Loader succeeded in signature verification
## Booting kernel from Legacy Image at 00007fc0 …
XIP Kernel Image … OK
OK

Starting kernel …

TZ Heap: start=0x3FA6B700, end=0x40000000
TZ dram: start=0x3F000000, end=0x40000000
[ 0.000000] timekeeping_init done
[ 2.183255] _log2usb_3init_module
[ 2.183923] [ 2.689479] [1]aes init success!
[ 2.690413] mmc0: 5880
[ 2.692098] at 0xf006d000 irq 100 data mode 2 m1
[ 2.697692] mmc1: 5880
[ 2.699130] at 0xf0012000 irq 60 data mode 3
[ 2.716586] special_arg: 00000002
[ 2.720598] test mmc…
[ 2.737340] [1]FE014E50:31585858:5814C03F:C5FD1175
[ 2.739349] [1]id1:4E503158 id2:58585814
[ 2.796477] special_arg: 00000001
[ 2.800811] [0]CMD8 ARG 0x000001AA – CMD Timeout (AccuVect 0x00000200 INTR 0x00000000).
[ 2.806141] [0]—–>Go into Command Tune!
[ 2.810582] [0]CMD8 ARG 0x000001AA – CMD Timeout (AccuVect 0x00000200 INTR 0x00000000).
[ 2.818929] [0]CMD8 ARG 0x000001AA – CMD Timeout (AccuVect 0x00000200 INTR 0x00000000).
[ 2.836444] [0]CMD8 ARG 0x000001AA – CMD Timeout (AccuVect 0x00000200 INTR 0x00000000).
[ 2.851429] [0]CMD8 ARG 0x000001AA – CMD Timeout (AccuVect 0x00000200 INTR 0x00000000).
[ 2.857124] [0]CMD8 ARG 0x000001AA – CMD Timeout (AccuVect 0x00000200 INTR 0x00000000).
[ 2.901197] test sd…
INIT: version 2.86 booting
INIT: /etc/inittab[8]: duplicate ID field “1”
[ 3.036372] special_arg: 00000001
[ 3.067955] test sd…
Loading /etc/profile…
Running rc.local…
net.ipv4.tcp_window_scaling = 6
net.core.rmem_max = 1048576
eeprom size: 0x4000
read data at offset (0x2c20): 0x00
value dismatch
eeprom size: 0x4000
read data at offset (0x2c25): 0x00
value dismatch
tty_mngr_init
Input: CLI
: switch to mw_cli.
: switch to app_man.
: switch to app_man.
**********DirectFBInit()
commandline read: app_man
(*) ##########dfb_mt53->mpegbuf[0] [0x351cc000] [8327168]
(*) ##########dfb_mt53->mpegbuf[1] [0x359c4000] [8327168]
(*) ##########dfb_mt53->mpegbuf[2] [0x361bc000] [8327168]
(*) ##########dfb_mt53->mpegbuf[3] [0x369b4000] [8327168]
(*) ##########dfb_mt53->mpegbuf[4] [0x371ac000] [8327168]
======DFB 3DMM u4VirtAddr : 0x3a9c3000, and DFB 3DMM u4Size : 0x1f81000======
input thread’s parent pid is 406 tid is 406
[dtv_app_mtk]>drv_init as 0x39 model
[dtv_app_mtk]>drv_init as EU model
[dtv_app_mtk]>HDMI fast booting init…
[ 5.235589] IMambP_Init panelConfig: 0x3, optionCode: 0x0, (optionCode&0x30) >> 4:0
[ 5.240715] IMambP_Init geometry: 4, nbrOfBoard: 0x2
[dtv_app_mtk]>register src chg call back in vdp_if2
[dtv_app_mtk]>
[dtv_app_mtk]>TVD MsgCtrl: NRL:60/40, PER:100/90
[dtv_app_mtk]>x_drv_init end!!
[dtv_app_mtk]>[ FakeDM ] Init…
[FakeDM] Init FM…
/dev is created./mnt is already existed. That is OK.
/mnt/usb is created.[FakeDM] FM inited…
[DM] _dm_cb_msg_thread enter
[DM] _dm_nfy_req_thread enter
[FakeDM] Init SMB…
[DM] _dm_nfy_req_thread get_nl_sock:23
[FakeDM] SMB inited…
[FakeDM] do coldboot start…
[DM] _dm_open_dev_thread: entered
[FakeDM] do coldboot end!!!
[DM] usbfs mounted.
Init chip_spec_init!!!!!
chipspec_check_bond_bootup_status() L313 This chip does not support ATSC Feature, Please check it!!!!!!!!!
[dtv_app_mtk]>
a_pre_unmute_init()L[514]:Enter
[dtv_app_mtk]>
a_pre_unmute_init()L[529]:Call c_svctx_reg_fast_boot_pre_unmute_cb
[dtv_app_mtk]>
a_pre_unmute_init()L[535]:Call c_svctx_reg_fast_boot_pre_unmute_cb Successful
Init encfs 0]>
{CI_glue}:ci_eng_init
{CI_glue}- Customer expect PROD key
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CI_glue}- c[1]
[FM_EMMC]block size: 512, chip in blk: 7487488
88888888888888 PHYSICAL_Init() entered 888888888888888
88888888888888 ITC_Init() entered 888888888888888
88888888888888 PHYS_DRVOpen() entered 888888888888888
88888888888888 STB_CIOpen() entered 888888888888888
88888888888888 STB_CIOpen() ended 888888888888888
{CI}CI_RegInterrupt_nfy
88888888888888 PHYS_DRVOpen() entered 888888888888888
EEPROM size is 0x70.
input thread pid is 406 tid is 427
original scheduler policy 0
scheduler nice 0
original child scheduler policy 0 prio 0
new child scheduler policy 2 prio 99
Start to wait IR event…
[ACFG_CUSTOM] acfg_custom_get_svl_tsl_dual_bank: default SUB
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[0] [0x351cc000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[1] [0x359c4000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[2] [0x361bc000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[3] [0x369b4000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[4] [0x371ac000] [8327168]
Init DSMCC[5][3][2]
MHEG5 TPS start to setup
[MHEG5_NVM]rw root path = /3rd_rw
MHEG5 TPS setup failed to create dir(-6)
[dtv_app_mtk]>
[dtv_app_mtk]>
x_wifi_cli_init~~~
[dtv_app_mtk]>
[dtv_app_mtk]>
Rec_util_thread:buffer addr 0x00003da9b000,size 0x380000
{HBBTV_DSMCC} Init HBBTV DSMCC
{DT} Real Time Clock is available on this system.
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[Alvin][_Get_HDMI_code][260] the hdmi code value = 0x17.
[init_drv_custom][1321] b_has_hdmi3 = 0x1
[Alvin][init_drv_custom][1338] load at_drv_cust_dirs.
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]> wakeup reason = 4
[dtv_app_mtk]>
open svctx lock check OK in sys ap start!
EEPROM size is 0x35b0.
EEPROM size is 0x4000.
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[OT][_acfg_ch_lst_load_p1][924]: e_wakeup_reason = 4.
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
Set country code to [GBR] by SB_KEY_TYPE_COUNTRY_CODE
DVBSI TUNER_TYPE = 1
DVBSI DVBC_OPERATOR operator= 0
DVBSI DVBS_OPERATOR operator= 0
TP vision IP SW – Mbdsl1(13.00.00.01)initializaiton-successful
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]> is_key_ok = 0
is_key_ok = 0
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
[BGM_OAD_DTC] _oad_detect_init
[dtv_app_mtk]>_stvapi_app_init_fct
{svl}x_svl_read_common(0x1016023)=0,size=1536
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
[DRV_INTERFACE] Get Operation Error. (-16)
[D-interface return ERROR] [DRV_CUSTOM_CUST_GET_SPEC_GPIO_ID] i4_ret = -16
GPIO = 0 Output 2
[dtv_app_mtk]> GPIO pin number invalid.
[dtv_app_mtk]> ****FIX ME****, acfg_custom_post_init:11844
****FIX ME****, acfg_custom_post_init:11844
****FIX ME****, acfg_custom_post_init:11844
[dtv_app_mtk]>
======[USB_HID_AP_LAYER]ACFG_GET_USB_HID_VALUE: 0.======
[dtv_app_mtk]>
======[USB_HID_AP_LAYER] ACFG_SET_USB_HID_LAY_IDX: 0, LANG STR: alb. ly: 0x616c62.======
[dtv_app_mtk]>(*)
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>===================
[dtv_app_mtk]>dfb_key_lan_load_keymap(alb,(null))
[dtv_app_mtk]>===================
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[ ACFG_CUST] c_scc_vid_set_game_mode, OFF
set 3D nav: SEMI_AUTO, ret = 0
{EDB} begin free 1 message
{EDB} begin free 2 message
{EDB} begin free 4 message
{EDB} begin free 5 message
{EDB} begin free 7 message

[dtv_app_mtk]>
[tv_app_mtk]>
[dtv_app_mtk]> S/W Version
[dtv_app_mtk]>
[dtv_app_mtk]> TPN141E_010.003.078.128
[dtv_app_mtk]>
[dtv_app_mtk]> NVM Version
[dtv_apppp_mtk]>
[dtv_app_mtk]> 1.01
[dtv_app_mtk]>
[dtv_app_mtk]>reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>Getting Model is OK!
[ONE_CHLIST]:
[ONE_CHLIST]: One Channel List: OFF
[FM_EMMC]block size: 512, chip in blk: 7487488
{EDB} begin free 7 message
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
{EDB} begin free 6 message
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{EDB} begin free 5 message
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
{EDB} begin free 4 message
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
{EDB} begin free 3 message
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
{EDB} begin free 2 message
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
[FM_EMMC]block size: 512, chip in blk: 7487488
[FM_EMMC]block size: 512, chip in blk: 7487488
{CDB} Loading metadata (version 7)
{EDB} begin free 1 message
[INET] 6.696, x_net_network_reg_nfy.1970 >>> 0x410a9c28, 0x00000000
[INET] 6.696, x_net_ni_enable.920 >>> if enable eth0->eth0
[INET] 6.799, x_net_network_reg_nfy.1974 >>> call eth0 enabled
_nav_pisl_init()
WRONG INDEX! 0 CHECK ME!
WRONG INDEX! 0 CHECK ME!
WRONG INDEX! 0 CHECK ME!
WRONG INDEX! 0 CHECK ME!
WRONG INDEX! 0 CHECK ME!
WRONG INDEX! 0 CHECK ME!
[dtv_app_mtk]>
[!!!Type mismatch:pisl.c:_nav_pisl_init:3598:-13]
[NAV][nav_get_svl_handle]SVL_ID= 1, ui_tuner_type = 0,b_broadcast_profile = 1, ui1_svl_lst_idx = 0
[dtv_app_mtk]>
[!!!Return fail:pisl.c:_pisl_src_detect_status:3388:-14]
[FM_EMMC]block size: 512, chip in blk: 7487488
[exp_model.c], ####_exp_model_create_amb_bri_frame
[exp_setting_custom.c], ####nav_exp_setting_custom_get_amb_bri
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
vc_cre initk]>
vc_hiden init>
[GCC_OSRC] osrc create
>: _nav_wfd_init is called !!
[WFD MSG]Create msg notify 0x103542f
left 64 top 210.
[dtv_app_mtk]>
left 64 top 253.
[dtv_app_mtk]>
left 64 top 195.
[INET] 7.313, x_net_ni_reg_ev_notify.1082 >>> dev: wifi0 event: 1 Plugin, 0x40dfdf8c
[INET] 7.314, x_net_ni_reg_ev_notify.1082 >>> dev: wifi0 event: 2 unPlug, 0x40dfdf8c
lru_list_create.
lru_list_create.
[INET] 7.315, _ni_mon_apply_broadcast.222 >>> notify event >>> 0x40dfdf8c wifi0, 2 unPlug <<<
_nav_ci_info_init() call x_ci_reg_nfy()…………………
_ci_init Country: GBR
{CACP}{info}[ sb_dvb_cp_eng.c][2172]
{CACP}{info}[ _sb_dvb_act_source.c][ 146] Get the Lower and Higher band [48000000, 859000000], and delta frequency =714000!
{CACP}{info}[ sb_dvb_cp_eng.c][2257]
{CACP}{info}[ sb_dvb_cp_eng.c][ 401] New state: SB_DVB_COND_MON_WAITING
{CACP}{info}[ sb_dvb_cp_eng.c][ 423]
{CACP}{info}[ ca_svl_builder.c][ 270] open_builder:[hdl:0x1014f80][tuner:tuner_ter_dig_0]
{CACP}{info}[ sb_dvb_cp_eng.c][2118]
{CACP}{info}[ sb_dvb_cp_eng.c][2172]
{CACP}{info}[ _sb_dvb_act_source.c][ 146] Get the Lower and Higher band [48000000, 859000000], and delta frequency =500000!
{CACP}{info}[ sb_dvb_cp_eng.c][2257]
{CACP}{info}[ ca_svl_builder.c][ 270] open_builder:[hdl:0x1014f75][tuner:tuner_cab_dig_0]
{CACP}{info}[ sb_dvb_cp_eng.c][2118]
{CACP}{info}[ sb_dvb_cp_eng.c][2118]
{CACP}{info}[ sb_dvb_cp_eng.c][2172]
{CACP}{info}[ _sb_dvb_act_source.c][ 146] Get the Lower and Higher band [1130479616, 593], and delta frequency =-1058824!
{CACP}{info}[ _sb_dvb_act_source.c][ 196] [Phase2][10][1000000]
{CACP}{info}[ sb_dvb_cp_eng.c][1540] The refered broadcast satl id is [7]
{CACP}{info}[ sb_dvb_cp_eng.c][1543] [Phase2][0x0][0]
{CACP}{info}[ sb_dvb_cp_eng.c][1556] [Phase2][0x1014f67][7]
{CACP}{info}[ _sb_dvb_act_storage.c][ 523] x_satl_open[7][ret:0]
{CACP}{info}[ _sb_dvb_act_storage.c][ 585]
{CACP}{info}[ sb_dvb_cp_eng.c][2257]
{CACP}{info}[ ca_svl_builder.c][ 270] open_builder:[hdl:0x1014f6a][tuner:tuner_sat_dig_0]
[INET] 7.460, x_net_ni_reg_ev_notify.1082 >>> dev: eth0 event: 3 IPChange, 0x40cd8be0
[INET] 7.461, x_net_ni_reg_ev_notify.1082 >>> dev: eth0 event: 2 unPlug, 0x40cd8be0
[INET] 7.461, x_net_ni_reg_ev_notify.1082 >>> dev: wifi0 event: 3 IPChange, 0x40cd8bb8
[INET] 7.462, x_net_ni_reg_ev_notify.1082 >>> dev: wifi0 event: 2 unPlug, 0x40cd8bb8
[Nav ci][_ci_init]—- CI_GET_TYPE_SAS_OPEN_STATE, b_ci_plus_sas_open_state: 0
[Nav ci][_ci_init]ui4_sas_opened_count = 0
{CACP}{info}[ sb_dvb_cp_eng.c][ 401] New state: SB_DVB_COND_MON_WAITING
{CACP}{info}[ sb_dvb_cp_eng.c][ 423]
Create Direct FB Event Buffer successful
{CACP}{info}[ sb_dvb_cp_eng.c][ 401] New state: SB_DVB_COND_MON_WAITING
{CACP}{info}[ sb_dvb_cp_eng.c][ 423]
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
ci reg sbtl nfy.
ci reg sbtl nfy, i4_ret:0
———–MTCEC_SetArcEnable(0,port(0))————–
[dtv_app_mtk]>———–MTCEC_SetArcEnable(0,port(1))————–
[dtv_app_mtk]>———–MTCEC_SetArcEnable(0,port(2))————–
[dtv_app_mtk]>———–MTCEC_SetArcEnable(0,port(3))————–
[dtv_app_mtk]>[_nav_ttx_init][3124] init teletext view 0.
Ken 20140326 _nav_hbbtv_status_icl_nfy_func
[dtv_app_mtk]>
[MHEG5 NVM] DVP_FileSize(NVMSTORE.dat, 0x814fec34)
[MHEG5_NVM]mheg5 root path = /3rd_rw/mh5n, ps_full_path = /3rd_rw/mh5n/NVMSTORE.dat
[MHEG5 NVM] DVP_DirectoryOpen()
[MHEG5_NVM]mheg5 root path = /3rd_rw/mh5n, ps_full_path = /3rd_rw/mh5n/
[MHEG5 NV[ 9.810194] _log2usb_open: 0x40000
M] DVP_DirectoryOpen() failed as -6
[INET] 7.817, _ni_mon_apply_broadcast.222 >>> notify event >>> 0x40cd8be0 eth0, 2 unPlug <<>> notify event >>> 0x40cd8bb8 wifi0, 2 unPlug <<[Nav ci] _ci_nw_wireless0_nfy_hdlr notify net unplug wireless0
Open audio outport: 0 ms
nav model channel id: -1, pre channel:-1
nav model i4_ret: -6, b ci service:0
Current ChannelID can’t find!, check last channel
last channelnot found ,set current to Invalid!!!!
File=[acfg_custom.c], Func=[a_cfg_set_aud_spdif_output_lvl] val=[0]
Init Digital output level success.[EDID Info][a_cfg_set_edidtoext]prepare set EDID to…
[dtv_app_mtk]>ra0: unknown interface: No such device
recovery netwokring
[dtv_app_mtk]>reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[BGM_OAD_DTC] _oad_detect_handle_msg :13
[dtv_app_mtk]>[NAV][_ctrl_update_tv_src_info][2455][Win_ID = 0]SVL_ID = 1, ui_tuner_type = 0, ui1_svl_lst_idx = 0
[NAV][nav_get_svl_handle]SVL_ID= 1, ui_tuner_type = 0,b_broadcast_profile = 1, ui1_svl_lst_idx = 0
[OAD Knight1108]: nav_oad_ssu_reset_all_data, ui4_total_dl_size 0, ui4_total_mem_size=0
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[NAV_CEC][_nav_cec_arc_handle_msg–>1202]ARC got msg NAV_UI_MSG_POWER_ON
[dtv_app_mtk]>
[!!!Return fail:nav_cec_util.c:nav_cec_util_is_amp_exist:669:-13]
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[MISC] pcl wakeup reason: 4
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
ci_oceanblue_set_ts_on_off,b_on is 0
inpSrc[1]mtk]>
send empty pmt due to change to other source
send empty pmt due to change to other source start
send empty pmt due to change to other source end
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>[OAD Knight1108]: nav_oad_ssu_reset_all_data, ui4_total_dl_size 0, ui4_total_mem_size=0
[LINUX_FAKE_API] d_custom_get_custom_mode
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
NAV_UI_MSG_APP_RESUMED
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[dtv_app_mtk]>
[a_cfg_custom_has_bds_usb_clone, line : 3926] Fail: a_rmv_dev_get_mnt_count, i4_ret = -6
[ ACFG_CUST] c_scc_vid_set_game_mode, OFF
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
Call function : a_msg_convert_register.
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
is_key_ok = 0
[_nav_cec_misc_icl_nfy_func][484]notify ID is dismatch.
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>Call function _mc_app_init_fct.
msg_convert_custom_init
msgconvert custom: do something before init
language is eng
country is GBR
_vol_ctrl_cfg_notify_init
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>
=== init pre routine started====
[_nav_cec_routing_info_timer_msg_hdlr][515]Wait for RI timeout: ui2_last_route_pa = 0x0
[Knight] a_plf_opt_get_hw_frc_config:PLF_OPT_CODE_BYTE_2:0x14, config:0
The min/max/pos of h-pos in driver is wrong.
The min/max/pos of v-pos in driver is wrong.
Ken 20140326 _nav_hbbtv_status_nfy_func_handler
[dtv_app_mtk]>
Ken 20140326 _nav_hbbtv_status_nfy_func_handler — running status : 0
[dtv_app_mtk]>
[Nav ci] _ci_nw_ethernet0_nfy_hdlr notify net unplug etho
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
ui4_key_code = 0xbf049 in functin: _tshift_view_is_key_handler
nav is analog tv, in _tshift_view_is_key_handler
wfd _nav_wfd_is_key_handler
recv key bf049 status 259 ,0
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
recv key bf049 status 260 ,0
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
ui4_key_code = 0xbf049 in functin: _tshift_view_is_key_handler
nav is analog tv, in _tshift_view_is_key_handler
wfd _nav_wfd_is_key_handler
recv key bf049 status 259 ,0
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
recv key bf049 status 260 ,0
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
ui4_key_code = 0xbf049 in functin: _tshift_view_is_key_handler
nav is analog tv, in _tshift_view_is_key_handler
wfd _nav_wfd_is_key_handler
recv key bf049 status 259 ,0
[OPTION_LIST_CUSTOM] a_icl_get ICL_RECID_HBBTV_STATUS ICL_HBBTV_START_STREAMING FALSE at line 46089
[dtv_app_mtk]>
recv key bf049 status 260 ,0
#######waiting for fg_get_bank_info true######
# mount 3rd_rw
[dtv_app_mtk]>[FM_EMMC]block size: 512, chip in blk: 7487488
[FM-Linux]Mount /dev/mmcblk0p13 to /3rd_rw successfully.
[FM](/dev/mmcblk0p13) is mounted to (/3rd_rw) successfully(0)
MHEG5 TPS start to setup
[MHEG5_NVM]rw root path = /3rd_rw
[MHEG5_NVM]created mheg5 root path = /3rd_rw/mh5n
MHEG5 TPS setup OK
# mount 3rd DMVERITY(SquashFS read-only)
[dtv_app_mtk]>[DM]status changed:device path:/block/dm-1
[DM]_dm_check_device_changed entered(changed device path:/block/dm-1)…
[DM]_dm_check_device_changed exited(changed device path:/block/dm-1)…
[DM]No dev name found.
[DM]status changed:device path:/block/dm-1
[DM]_dm_check_device_changed entered(changed device path:/block/dm-1)…
[DM]_dm_check_device_changed exited(changed device path:/block/dm-1)…
[DM]No dev name found.
[dtv_app_mtk]>
[dtv_app_mtk]>real 0m0.030s
[dtv_app_mtk]>user 0m0.000s
[dtv_app_mtk]>sys 0m0.005s
[FM](/dev/mtdblock9) is mounted to (/3rd) unsuccessfully(-6)
MHEG5 TPS start to setup
[MHEG5_NVM]rw root path = /3rd_rw
[MHEG5_NVM]created mheg5 root path = /3rd_rw/mh5n
MHEG5 TPS setup OK
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>
[dtv_app_mtk]>
=== init pre routine finished====
#######init_post_routie start ######
# mount perm]>
[ 12.514296] EXT4-fs (mmcblk0p12): recovery complete
[ 12.516425] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
[dtv_app_mtk]>[FM_EMMC]block size: 512, chip in blk: 7487488
[FM-Linux]Mount /dev/mmcblk0p12 to /perm successfully.
[FM](/dev/mmcblk0p12) is mounted to (/perm) successfully(0)
# mount ro_data
[ 12.623898] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
[dtv_app_mtk]>[FM_EMMC]block size: 512, chip in blk: 7487488
[FM-Linux]Mount /dev/mmcblk0p14 to /ro_data successfully.
[FM](/dev/mmcblk0p14) is mounted to (/ro_data) successfully(0)
# mount game]>
[ 12.745792] EXT4-fs (mmcblk0p15): recovery complete
[ 12.748190] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts:
[dtv_app_mtk]>[FM_EMMC]block size: 512, chip in blk: 7487488
[FM-Linux]Mount /dev/mmcblk0p15 to /game successfully.
[FM](/dev/mmcblk0p15) is mounted to (/game) successfully(0)
[qt_main]>[QT](Oct 13 2014 14:00:41)/5
[qt_main]>[QT]info:file ‘/3rd_rw/qt/qtrc’ can’t read
[qt_main]>[QT]log level:5 -> 5
[qt_main]>[QT]info:file ‘/3rd/qt/qtrc’ can’t read
[qt_main]>[QT]log level:5 -> 5
[qt_main]>[QT]info:setting KeyAutoRepeatDelay: 800->800
[qt_main]>[QT]info:setting KeyAutoRepeatPeriod: 160->160
[qt_main]>[QT]info:setting Mask Repeated Key: 0->0
[ 13.296818] rtusb init rtusbSTA —>
[ 13.297960] ===>rtusb_probe()!
[ 13.304145]
[ 13.304152]
[ 13.304155] === pAd = eb66b000, size = 1601888 ===
[ 13.304160]
[ 13.312455] >> can init …
[INET] 11.432, _ni_mon_apply_broadcast.222 >>> notify event >>> 0x40dfdf8c wifi0, 1 Plugin <<[SMConfig][loadConfig] File not found! path: “/3rd/qt/AEDK/SystemManager/sm_config.ini”
[qt_main]>[main] Show mouse!
[qt_main]>setenv returns: 0
[ 13.592192] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 13.688132] usbcore: registered new interface driver usbhid
[ 13.691205] usbhid: USB HID core driver
[dtv_app_mtk]>mount: mounting none on /proc/bus/usb failed: Device or resource busy
[ 13.798380] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0)
[ 13.811689] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0)
[dtv_app_mtk]>insmod: error inserting ‘/basic/modules/v4l2-common.[ 13.820765] Re-open MT53_FB successfully
ko’: -1 Unknown symbol in module
[qt_main]>(*) ##########dfb_mt53->mpegbuf[0] [0x351cc000] [8327168]
[qt_main]>(*) ##########dfb_mt53->mpegbuf[1] [0x359c4000] [8327168]
[qt_main]>(*) ##########dfb_mt53->mpegbuf[2] [0x361bc000] [8327168]
[qt_main]>(*) ##########dfb_mt53->mpegbuf[3] [0x369b4000] [8327168]
[qt_main]>(*) ##########dfb_m[ 13.855374] Linux video capture interface: v2.00
t53->mpegbuf[4] [0x371ac000] [8327168]
[qt_main]>[QT]info:window will be doublebuffer
[qt_main]> (!!!) *** WARNING [letting unprivileged IDirectFBDisplayLayer::GetSurface() call pass until cooperative level handling is finished] *** [directfb_1.4.0/Source/DirectFB/src/displa[ 13.885515] usbcore: registered new interface driver uvcvideo
[ 13.890165] USB Video Class driver (v1.1.0)
y/idirectfbdisplaylayer.c:176 in IDirectFBDisplayLayer_GetSurface()]
[ 13.909287] [ALSA] alsa_mt85xx_init().
[ 13.911049] [ALSA] probe: devptr->id = 0
[ 13.927127] [ALSA] alsa_mt85xx_init().
[ 13.928784] [ALSA] probe: devptr->id = 0
[qt_main]>[QTD]set cursor:
[qt_main]>[120:initEDKCommon]
[qt_main]>EDK/RPC Init OK
[qt_main]>
[qt_main]>
[qt_main]>
[dtv_app_mtk]>CFG_COUNTRY_CODE country=CHN
CFG_COUNTRY_CODE country=CHN
CFG_COUNTRY_CODE country=CHN
CFG_COUNTRY_CODE country=CHN
CFG_COUNTRY_CODE country=CHN
CFG_COUNTRY_CODE country=CHN
CFG_COUNTRY_CODE country=CHN
[513]{edb_client_init} no-op as it’s already initialized
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
CFG_COUNTRY_CODE country=GBR
[qt_main]>am client thread start
reason: 0x00000004 – 0x00000000
[qt_main]>=======================================================
[qt_main]> Project: System Manager
[qt_main]> Release Time: Nov 30 2015, 16:48:01
[qt_main]>=======================================================
[qt_main]>
[qt_main]> *————–) FusionDale v0.8.1 (————–*
[qt_main]> (c) 2006-2007 directfb.org
[qt_main]> ———————————————–
[qt_main]>
[dtv_app_mtk]>#######init_post_routie finished ######
[dtv_app_mtk]>
[dtv_app_mtk]> *————–) FusionDale v0.8.1 (————–*
[dtv_app_mtk]> (c) 2006-2007 directfb.org
[dtv_app_mtk]> ———————————————–
[dtv_app_mtk]>
[dtv_app_mtk]>InitDRM
[dtv_app_mtk]>[Cmpb_MW INFO]IMtkPb_Ctrl_Status_Callback-20642::The callback addr = 0x4103d8f4!!!
[dtv_app_mtk]>commandline read: jsapp
[ 14.488400] Re-open MT53_FB successfully
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[0] [0x351cc000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[1] [0x359c4000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[2] [0x361bc000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[3] [0x369b4000] [8327168]
[dtv_app_mtk]>(*) ##########dfb_mt53->mpegbuf[4] [0x371ac000] [8327168]
m_pid child pid :0, 857
m_pid child pid :0, 852
**********DirectFBInit()
[dtv_app_mtk]>[Mxtv]> No valid Mac address is retrieved!! Can’t create new player-uuid!!
[dtv_app_mtk]> [Mxtv]> Mac address: 000000000000
[dtv_app_mtk]>[Mxtv]> player-uuid is not available and uuid is available, write player-uuid to file!!
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]>[Mxtv]> player-model:2k14O1
[dtv_app_mtk]>(*) Running player ‘P’ with UUID 2782436bdcd945c6de2436f2ba105f9b!
[dtv_app_mtk]>
/home/2K14_EU/release/vm_linux/dtv_linux/dtv_process/nettv/proxy/src/nettv_proxy.c 41, load libnettv.so successfully
[dtv_app_mtk]>
/home/2K14_EU/release/vm_linux/dtv_linux/dtv_process/nettv/proxy/src/nettv_proxy.c 41, load libnettv.so successfully
[dtv_app_mtk]>
/home/2K14_EU/release/vm_linux/dtv_linux/dtv_process/nettv/proxy/src/nettv_proxy.c 41, load libnettv.so successfully
[NAV CI][_ci_icl_nfy_func]t_pin_caps.t_cap_code = 0, i4_ret = 0
[NAV CI][_ci_icl_nfy_func]t_pin_caps.t_cap_code = 0, i4_ret = 0
reason: 0x00000004 – 0x00000000
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]>c_rpc_reg_stvapi_op_hndlrs
[dtv_app_mtk]>c_rpc_reg_stvapi_chlist_op_hndlrs
[dtv_app_mtk]>
[dtv_app_mtk]> [RHXTV] c_rpc_reg_xtvapi_op_hndlrs
[dtv_app_mtk]>[NETTV][M]>>>>>>>>>>[InputEventListener.cpp][486], InputEventListener() Create Direct FB Event Buffer successful
[dtv_app_mtk]>c_rpc_reg_phisl_op_hndlrs
[dtv_app_mtk]>SC_FCT_0: sched_getparam 390 error -1
[dtv_app_mtk]>SC_FCT_0: sched_getparam 394 error -1
[dtv_app_mtk]>[_TunerNotifyInitThread:228] Reg[ 14.703117] EXT4-fs (mmcblk0p12): re-mounted. Opts: user_xattr,barrier=1,data=ordered
ister Tuner component Fail!
[dtv_app_mtk]>[_TunerNotifyTunerProc:265] Register Tuner component excl list Fail!
[dtv_app_mtk]>[_TunerNotifyTunerProc:265] Register Tuner component excl list Fail!
[dtv_app_mtk]>[MTCI0] MTCI_Init : 0
[dtv_app_mtk]>MTCI0_RegFBClk() fail, ret=-1
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]>[* GL DFB *] Create plane (ON layer) :1016444
[dtv_app_mtk]>[* GL DFB *] Create plane (ON window (Shared)) :1016442
[dtv_app_mtk]> UART thread inited.
[dtv_app_mtk]>MTDRVCUST_OptQuery() fail, ret=-1
[dtv_app_mtk]>MTDRVCUST_dcustom_misc_set() fail, ret=-1
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[qt_main]>[layer_id = 0] config_layer->stacking = 0x1
[qt_main]>
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>MTDRVCUST_dcustom_cust_spec_get() fail, ret=-1
[dtv_app_mtk]>[Jiangtao] Set language 6384738
[dtv_app_mtk]>gl_dfb_plane_enum want plane 0
[dtv_app_mtk]>gl_dfb_plane_open want plane 0
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>[ipepgmw_epgctl_set_day_time_saving:606]>
[dtv_app_mtk]>[ipepgmw_epgctl_set_time_zone:611]>
[dtv_app_mtk]>[ipepgmw_epgctl_set_connection_type:625]>
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]> Error: input event code != event filter event code for timeout event
[dtv_app_mtk]>MTRM_Direct_Call() fail, ret=-14
[dtv_app_mtk]>[ipepgmw_epgctl_set_day_time_saving:606]>
[dtv_app_mtk]>[ipepgmw_epgctl_set_region:616]>
[dtv_app_mtk]>[ipepgmw_epgctl_set_region_to_shmemory:1284]>
[dtv_app_mtk]>MTDRVCUST_dcustom_misc_set() fail, ret=-1
[dtv_app_mtk]>MTDRVCUST_OptQuery() fail, ret=-1
[dtv_app_mtk]>MTDRVCUST_OptQuery() fail, ret=-1
[dtv_app_mtk]>[NETTV][M]>>>>>>>>>>[CNettvLibGlue.cpp][610], initWarm() IMnettvP_InitWarm() option: 0x4b !!
[dtv_app_mtk]>MTDRVCUST_OptQuery() fail, ret=-1
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>MTVDEC_GetInfo() fail, ret=-2
[dtv_app_mtk]>cp: cannot stat `/usr/opera/opera_dir/HbbTV_whitelist.dat’: No such file or directory
[dtv_app_mtk]>CMD_CONVERT: create NONBLOCK pipe !!!
[dtv_app_mtk]>
[dtv_app_mtk]>_hndlr_addEventListener, arg0=15
[dtv_app_mtk]>_hndlr_a_pisl_reg_the_nfy_callback, the pf_nfy = 0x42b89a30
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]>[1945:IMnettvP_GetNetTVReleaseVersion]> [P]========>>
[dtv_app_mtk]>[1952:IMnettvP_GetNetTVReleaseVersion]> NetTV ICP SW: 2.22
[dtv_app_mtk]>
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]>gl_dfb_plane_enum want plane 0
[dtv_app_mtk]>gl_dfb_plane_open want plane 0
[dtv_app_mtk]>gl_dfb_plane_open want plane 2
[dtv_app_mtk]>[1805:IMnettvP_Ipepg_Otg_EnableDisable]> [P]========>>Calling API IMnettvP_Ipepg_Otg_EnableDisable param = [0]
[dtv_app_mtk]>[780:IMnettvP_UserChangedLanguage]> [P]========>>User Language=en
[dtv_app_mtk]>[940:IMnettvP_UserChangedCountry]> [P]========>> change to country: GB
[dtv_app_mtk]>[1566:IMnettvP_Ipepg_SetDayTimeSaving]> [P]========>>DayTimeSaving = 0
[dtv_app_mtk]>[574:nettvapp_SetDayTimeSaving]> DayTimeSaving =0
[dtv_app_mtk]>
[dtv_app_mtk]>[1572:IMnettvP_Ipepg_SetTimeZone]> [P]========>>TimeZone = 0
[dtv_app_mtk]>[589:nettvapp_SetTimeZone]> TimeZone =0
[dtv_app_mtk]>
[dtv_app_mtk]>[1584:IMnettvP_Ipepg_SetConnectionType]> [P]========>>Connection Type =
[dtv_app_mtk]>[621:nettvapp_SetConnectionType]> type =
[dtv_app_mtk]>
[dtv_app_mtk]>[1566:IMnettvP_Ipepg_SetDayTimeSaving]> [P]========>>DayTimeSaving = 0
[dtv_app_mtk]>[574:nettvapp_SetDayTimeSaving]> DayTimeSaving =0
[dtv_app_mtk]>
[dtv_app_mtk]>[1578:IMnettvP_Ipepg_SetRegion]> [P]========>>Region = 1
[dtv_app_mtk]>[604:nettvapp_SetRegion]> region =1
[dtv_app_mtk]>
[dtv_app_mtk]>OPC_VID_UI_PQ_VALUE=0[190:_imnettv_copydata]> [P]========>>time: 00:00:12 1970.01.01
[dtv_app_mtk]>
[dtv_app_mtk]>[195:_imnettv_copydata]> [P]========>>/usr/opera/opera_home a time: 06:28:16 2017.02.15
[dtv_app_mtk]>
[dtv_app_mtk]>[199:_imnettv_copydata]> [P]========>>success! stime to : 06:28:16 2017.02.15
[dtv_app_mtk]>
[dtv_app_mtk]>[212:_imnettv_copydata]> [P]========>>copy /mnt/browser/HbbTV_whitelist.dat success!!
[qt_main]> return DWSC_MIDDLE
stacking [0x0], layer_id [0]
[qt_main]>
[qt_main]>
[qt_main]>hi xingxing attach keyeventbuffer
[qt_main]>
[qt_main]>hi xingxing attach mouseeventbuffer
[qt_main]>
[dtv_app_mtk]>mkdir: cannot create directory `/tmp/opera_home’: File exists
[dtv_app_mtk]>[251:_imnettv_copydata]> [P]========>>copy data files from /usr/opera/opera_home to /tmp/opera_home success
[dtv_app_mtk]>cp: omitting directory `/usr/opera/opera_home/handlers’
[dtv_app_mtk]>cp: omitting directory `/usr/opera/opera_home/plugins’
[qt_main]> [SystemRunning][onProcessMessage](267) msg: “AM pause” , module: “none module”
[qt_main]>
[dtv_app_mtk]>[267:_imnettv_copydata]> [P]========>>copy opera data files from /mnt/broser to /tmp/opera_home success
[qt_main]>
[qt_main]>
[qt_main]>
[qt_main]>
[qt_main]> [SystemRunning][onProcessMessage](267) msg: “resume module” , module: “ChannelZapper”
[qt_main]>
[qt_main]>
[dtv_app_mtk]>(*) Direct/Interface: Using ‘PNG’ implementation of ‘IDirectFBImageProvider’.
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]>**********DirectFBInit()
[dtv_app_mtk]>gl_dfb_plane_open want plane 1
[dtv_app_mtk]>[271:_imnettv_copydata]> [P]========>>copy opera pem files from /mnt/broser to /tmp/ success
[dtv_app_mtk]>
[dtv_app_mtk]>[281:_imnettv_copydata]> [P]========>>YTLB certification support, opera.ini R/W
[qt_main]>(*) Direct/Interface: Using ‘PNG’ implementation of ‘IDirectFBImageProvider’.
[dtv_app_mtk]>[P]==========[nettvplf_intfR_ecdctl_GetKey:357]> Calling IMnettvR_ecdctl_plf_get_key_data
[dtv_app[ 16.012967] pgd = de660000
[ 16.015776] [00000000] *pgd=1e785831, *pte=00000000, *ppte=00000000
[ 16.021862]
[ 16.023348] Pid: 869, comm: nettv
[ 16.028061] CPU: 1 Tainted: P (3.0.13 #1)
[ 16.033330] PC is at 0x0
[ 16.035862] LR is at 0x87e99804
[ 16.038989] pc : [] lr : [] psr: 60000010
[ 16.038995] sp : 00000000 ip : 00000061 fp : 00000000
[ 16.050502] r10: 00000006 r9 : 87e99a48 r8 : 80cadc00
[ 16.055657] r7 : 87e99870 r6 : 87e99804 r5 : 85061de4 r4 : 85145f80
[ 16.062168] r3 : 00000000 r2 : 00000000 r1 : 87e997ea r0 : 87e996b0
[ 16.068693] Flags: nZCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
[ 16.075967] Control: 10c53c7d Table: 1e66004a DAC: 00000015
[ 16.082560] NDC fusion_skirmish_wait EINTR()
_mtk]>
[a_ecd_custom_get_decry_info_by_filename]:encryption length: 148 , encry_buf:
[dtv_app_mtk]>
[a_ecd_custom_get_decry_info_by_filename]: f_name: PSTVK001
decry_buf: k]>
decry_len: 128
[ 16.635919] Re-open MT53_FB successfully
[ 17.599679] MGC_VBusControl 856: [USB0]Vbus On gpio[-1].
[ 17.679646] MGC_VBusControl 856: [USB2]Vbus On gpio[-1].
[AM ERROR][am_main.c][_am_child_sig_action][AM main]receive SIGCHLD, return:433, status:0x8b
[AM ERROR][AppManager.cpp][__am_window_removed]Focus to unmanaged window !!
(*) SaWMan/Watcher: Process 433 [2] [ 18.748010] Restarting system.

REPLACED CPU,RAM FLASHED WITH UPGRAE_LOADER AND 3RWD PACKAGE SAME THING NO CHANGESS. ANY ADVICE ?