[Toengel]

Dies ist der Diskussions-Thread zum Blog-Eintrag: Philips 2020: Die 7505/7555 UHD TVs mit Saphi, P5, HDR10+ und Dolby Vision.

Thema

[DJ]

I have a 43pus7505/12. When I turn it on, the Philips logo is displayed and the screen goes black, and then it restarts indefinitely. I hope to get a suitable PKG strong brushing package. Thanks！

[Toengel]

Hi,

see firmware archive… and no need to post it 4x in this forum ;-)

Toengel@Alex

[DJ]

Thank you!

[Christoph]

I have exactly the same problem like DJ. Used the firmware and upgrade loader mentioned here. Formatted a usb stick with a 6GB partition in MBR with FAT32. Put the files in the root folder (one tried after another). But nothing happens. TV will start and show Philips logo, then goes black and loop into this again. Any other hints?

[Toengel]

Hi,

did you keep the name “upgrade.pkg” on the USB stick? And only put that file on that stick…

Toengel@Alex

[Christoph]

Hey, yes. First I tried the autorun.pkg from Philips for a normal update which didn’t work, then I even reformatted the stick again and used upgrade.pkg from your site. In both scenarios only one file directly in root. Could this behaviour (Philips logo, black screen (but with background light) and boot again) be related to a hardware issue?

[Toengel]

Hi,

please test different USB sticks in case the .pkg update file (try also to rename to “upgrade_loader.pkg”) is not executed at the first time (For slow USB drives the detection time will be too short during start up).

Toengel@Alex

[Christoph]

Tried it with 3 different sticks (but they are all USB 3, hope this doesn’t matter). Renaming the file from upgrade.pkg to upgrade_loader.pkg made no difference. Tried also the blue USB 3 ports, even if they should be wrong. Is this method really available for SAPHI models? Your blog and all other information only mention Android based models. It seems 90% of all issues and fixes only apply to Android models. :/

[Toengel]

Hi,

yes, it is the same procedure… USB stick is formatted with FAT or FAT32? You can also try to log via UART port, if the stick is read during boot…

Toengel@Alex

[Christoph]

Thanks for all your support! They are formatted with FAT32 (via Linux and via Windows Tools).

Just ordered this USB-UART Adapter you mentioned in your blog post. Going deeper into the rabbit hole :-D

[Christoph]

Hi, I was finally able to get some debug output, but I can’t find any hint why my TV is not working nor why my USB sticks doesn’t provide the update. They are all found (/dev/sda)

 

NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on Key pad!
ENABLE_WATCHDOG
Power on Key pad!
[CPE]swoption=100a500-c0d5208a
Power on Key pad!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf408eb8c
Request to start secos

last jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0

B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff fun c=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x0000 0000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000 b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.339719] Creating worker thread
[0-0.339800] Succsesfuly Created
[0-0.453500] serial8250 serial8250: irq 8 set affinity 0
[0-0.470484] serial8250 serial8250: irq 9 set affinity 0
[0-0.476952] serial8250 serial8250: irq 10 set affinity 0
[0-0.678806] [USB] invalid irq-affinity node value 2
[0-0.698752] [USB] irq 16 invalid irq-affinity node value 3
[0-0.729100] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[0-0.929126] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1 280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
/etc/profile start
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[1-2.625900] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[0-2.633141] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.003107 seconds, 5.0KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.003405 seconds, 4.6KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on System Reset!
ENABLE_WATCHDOG
Power on System Reset!
[CPE]swoption=100a500-c0d5208a
Power on System Reset!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf40aea8c
Request to start secos

last jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0

B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.343600] Creating worker thread
[0-0.343683] Succsesfuly Created
[1-0.482114] serial8250 serial8250: irq 8 set affinity 0
[1-0.498935] serial8250 serial8250: irq 9 set affinity 0
[1-0.505418] serial8250 serial8250: irq 10 set affinity 0
[1-0.638822] [USB] invalid irq-affinity node value 2
[1-0.658873] [USB] irq 16 invalid irq-affinity node value 3
[1-0.689840] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[0-0.885120] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
/etc/profile start
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[0-2.596788] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[1-2.603936] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.000688 seconds, 22.7KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.001957 seconds, 8.0KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on System Reset!
ENABLE_WATCHDOG
Power on System Reset!
[CPE]swoption=100a500-c0d5208a
Power on System Reset!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf408ea8c
Request to start secos

last jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0

B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.339716] Creating worker thread
[0-0.339798] Succsesfuly Created
[0-0.471505] serial8250 serial8250: irq 8 set affinity 0
[0-0.488249] serial8250 serial8250: irq 9 set affinity 0
[0-0.494690] serial8250 serial8250: irq 10 set affinity 0
[0-0.670797] [USB] invalid irq-affinity node value 2
[0-0.694760] [USB] irq 16 invalid irq-affinity node value 3
[0-0.725135] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[1-1.013108] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
/etc/profile start
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[0-2.690374] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[0-2.697488] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002490 seconds, 6.3KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002121 seconds, 7.4KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # [0-51.990944] sd 0:0:0:0: [sda] No Caching mode page found
[0-51.996215] sd 0:0:0:0: [sda] Assuming drive cache: write through
NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on Key pad!
ENABLE_WATCHDOG
Power on Key pad!
[CPE]swoption=100a500-c0d5208a
Power on Key pad!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf408ea8c
Request to start secos

last jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0

B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.335877] Creating worker thread
[0-0.335959] Succsesfuly Created
[1-0.465452] serial8250 serial8250: irq 8 set affinity 0
[1-0.482060] serial8250 serial8250: irq 9 set affinity 0
[1-0.488593] serial8250 serial8250: irq 10 set affinity 0
[1-0.702773] [USB] invalid irq-affinity node value 2
[1-0.722711] [USB] irq 16 invalid irq-affinity node value 3
[1-0.753051] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[1-0.957075] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
[0-2.490992] sd 0:0:0:0: [sda] No Caching mode page found
[0-2.496291] sd 0:0:0:0: [sda] Assuming drive cache: write through
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
/etc/profile start
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[1-2.752082] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[1-2.759127] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.000680 seconds, 23.0KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002141 seconds, 7.3KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # restart
/bin/sh: restart: not found
/ # shutdown -r now
/bin/sh: shutdown: not found
/ #
NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on Key pad!
ENABLE_WATCHDOG
Power on Key pad!
[CPE]swoption=100a500-c0d5208a
Power on Key pad!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf508eb84
Request to start secos

last jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0

B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.339727] Creating worker thread
[0-0.339812] Succsesfuly Created
[1-0.478262] serial8250 serial8250: irq 8 set affinity 0
[1-0.494943] serial8250 serial8250: irq 9 set affinity 0
[1-0.501443] serial8250 serial8250: irq 10 set affinity 0
[1-0.702826] [USB] invalid irq-affinity node value 2
[1-0.722752] [USB] irq 16 invalid irq-affinity node value 3
[1-0.753060] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[1-0.949132] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
[1-2.497841] sd 0:0:0:0: [sda] No Caching mode page found
backlight: power[1-2.503494] sd 0:0:0:0: [sda] Assuming drive cache: write thonevent = 1
rough
BootlogoProject: s32BacklightLevel = 0
/etc/profile start
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[1-2.765180] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[0-2.778405] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.000670 seconds, 23.3KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002870 seconds, 5.4KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/

[Autor]

Antworten