Philips: Neue Firmware 90.0 für 4000er bis 5500er TV-Serien (2012)

Tachchen,

Philips hat vor zwei TAgen für die 2012er TV-Serien 4000, 4300, 5000 und 5500 eine neue Firmware veröffentlicht: Version 90.0:

Q554E-0.90.0.0_bld12a Generation date: 26/07/2012 00:31:17

Q554M-0.90.0.0_bld12b Generation date: 26/07/2012 00:31:18

Q554E_0.90.0.0 (Date published: 2012-07-30)
Q554M_0.90.0.0 (Date published: 2012-07-30)

• TV keeps rebooting by itself.
• TV keeps restarting itself when streaming from Videociety. (Only applicable to country, Germany)
• Subtitle menu cannot be opened anymore and P+/P- do not work anymore after you switch between channels with HbbTV application switched on.
• Missing satellite channels. (Only applicable to country, Germany)
• TV reboots by itself when you switch it on from standby when Portuguese is selected as menu language.
• Unable to perform software upgrade when Portuguese is selected as menu language.

IMPORTANT: If your TV menu language is selected as Portuguese, follow the instructions below:

• After you have inserted the USB flash drive to the TV, please wait for 30 seconds. The software upgrade starts automatically.
• If the software upgrade does not start automatically, disconnect the power cable from the power outlet. Do not remove your USB flash drive. Wait for one minute then reconnect the power cable, the software upgrade starts automatically.

Es empfiehlt sich, nach der erfolgreichen Installation (also NACHDEM der TV wieder läuft), den TV 2-3 Minuten vom Strom zu nehmen!

Toengel@Alex

Follow me on Twitter (@PhilipsToengel)

Die Bewertung des Beitrags ist durch reCAPTCHA geschützt und es gelten die Datenschutzbestimmungen und Nutzungsbedingungen von Google.