Philips: Neue Firmware für 2013er TV-Serien 32×8, 4xx8 und 50×8 (TPM1013E: 3.20.0.1)

Erfahrungen, Feedback und Bugmeldungen zu einzelnen Firmware-Versionen
5038, 5028, 5018, 5008, 4908, 4528, 4508, 4418, 4268, 4258, 4228, 4218, 4208, 3258, 3218, 3208
  • Dieses Thema hat 18 Antworten und 2 Teilnehmer, und wurde zuletzt aktualisiert vor 1 Jahr von Toengel.
Ansicht von 15 Antworten - 1 bis 15 (von insgesamt 18)
  • Autor
    Antworten
  • #100242 Antworten
    Muhammed Yucel
    Gast

    I have 32PFL4258-K/12 model and I called service due to laggy remote input and very slow TV, they came and downgraded TV to version TPM1013E_002.025.000.001. But I want to check out latest version but I also want to downgrade if TV slows really down with the latest update. I couldn’t find TPM1013E_002.025.000.001 version here, can I found or extract firmware on my TV?

    #100292 Antworten
    Toengel
    Administrator

    Hi,

    first check the latest one (make factory reset afterwards)… If you still want to downgrade, check my firmware archive and write a message, if you need an older version…

    Toengel@Alex

    #184646 Antworten
    Mareks
    Gast

    Hello, I bought 32pfl3258H/12 like 5 years ago, and used it as normal Tv without smart tv and I forgot that If I upgrade my CI module wont work and I was right. And now I need one of the first softwares, cause before I updated my CI module worked.
    Maybe you can give some tips to fix this TV? I dont wanna throw this TV out yet

    #184647 Antworten
    Mareks
    Gast

    Now I’ve got newest version. I think before I had TPM1013E_002.004.000.001

    #184654 Antworten
    Toengel
    Administrator

    Hi,

    you should consider to update your module…

    Nevertheless, you can find the latext 2.x in my archive:

    Philips TV Firmware Archiv / Previous Firmware Versions

    Tell me, if that works…

    Toengel@Alex

    #184756 Antworten
    Mareks
    Gast

    Hi, downgraded to 2.30.0.1 from your archive but it didn’t solve the problem. Maybe you know why on the menu list I’ve got a choice to choose between TV(cabel) and Satelite? I dont have a socket for satelite, also TV recognize when CAM is inserted. Im paying for a few channels that requires the CAM module to view them.

    #184757 Antworten
    Mareks
    Gast

    How may I be sure that this is TV problem before doing something that I should not do, like buy new Tv or contact television supplier(last choice of all, they are like amateurs and prefer not to conntact them)

    #184770 Antworten
    Toengel
    Administrator

    Hi,

    that is strange with the SAT socket…

    1) Compare the option codes on the sticker of the back of your TV with the ones in the CSM
    2) try factory reset

    Toengel@Alex

    #184777 Antworten
    Mareks
    Gast

    Sticker do match with the CSM. And factory restet didn’t help also. Actually I allways did plug out tv because every time I turned it off it turned itself on and it wasnt remote or sensor fault. And when I downgraded to 2.30.0.1 it did help the TV no longer turns on by it self. I think all the problems is caused by the software. If all updates do contain older updates than it should be posible to some how get out only old updates and delete new ones but I’ve got no idea how to read and edit UPG file format

    #188064 Antworten
    Jos
    Gast

    HI Mareks, I have the same problem, after uploading the software the television 32pfl3258h/12 doesn’t recognize the CI anymore. Once i have received a stick from philips, including the downgrade, but i have lost the stick……
    Don you have a solution already ?

    #188068 Antworten
    Toengel
    Administrator

    Hi,

    did you check my TV Firmware Archiv?

    Toengel@Alex

    #188655 Antworten
    Mareks
    Gast

    Hi Jos, still no solution. I am not 100% sure but the fix could be downgrade to TPM1013E_002.014.000.001 but I could not find it any where, but this tv is kind of old and sooner or later will fail. thought my tv only has about 5000 hours of run only and few times been in water and still running that’s a tough tv.

    #188660 Antworten
    Toengel
    Administrator

    Hi,

    did you check my firmware archive for an older firmware?

    Toengel@Alex

    #190325 Antworten
    Enrico
    Gast

    Hallo, im Netz häufen sich die Fälle in dem das Sat Menü verschwindet.Ich habe hier auch einen TV bei dem auf einmal das Menü nicht mehr da ist. Wenn ich richtig gelesen habe hilft ein FW downgrade nicht? Was kann ich noch probieren?
    Rücksetzen hat natürlich nichts gebracht.

    #190329 Antworten
    Enrico
    Gast

    Also ich habe jetzt über eine Stunde probiert ein downgrade durchzufüher, leider ohne erfolg. ich habe beide varianten probiert aber er fängt kein update an.Weder über neustart und okay noch mit der manuellen Methode. Dort findet er zwar die Datei aber nach dem klick kommt nur: Fehler

Ansicht von 15 Antworten - 1 bis 15 (von insgesamt 18)
Antwort auf: Antwort #100292 in Philips: Neue Firmware für 2013er TV-Serien 32×8, 4xx8 und 50×8 (TPM1013E: 3.20.0.1)
Deine Information:




Die Kommentieren ist durch reCAPTCHA geschützt und es gelten die Datenschutzbestimmungen und Nutzungsbedingungen von Google.

Toengels Philips Blog via WhatsApp-Kanal folgen (Bild antippen/anklicken)!

WhatsApp Logo

Join Toengels Philips Blog on the new WhatsApp channel (tap/click image)!