Philips: Informationen zum geänderten OLED-Bereinigungsprozess (Burn-In)

Erfahrungen, Feedback und Bugmeldungen zu einzelnen Firmware-Versionen
Allgemeine Hinweise zur TV-Firmware
Ansicht von 15 Antworten - 16 bis 30 (von insgesamt 56)
  • Autor
    Antworten
  • #185463 Antworten
    Gabor
    Gast

    Halo
    Für oled754 Saphi keine Firmware vorhanden wegen geänderten OLED-Bereinigungsprozes?

    Danke

    #185471 Antworten
    Toengel
    Administrator

    Tachchen,

    da der 754 bereits ein 2019er TV ist, sollte ihr bereits diese Veränderung von Anfang an implementiert sein.

    Toengel@Alex

    #185720 Antworten
    Ronny
    Gast

    Hallo
    Die blöde Bildreinigung könnte mann auch morgens gegen 3 Uhr machen und das jeden morgen und nicht wenn mann Film schaut.
    Macht keinen spas mehr wenn mann nicht selbst entscheiden kann wann man die Bildreinigung durchführt. Mein nächster wird
    nicht von Phillips sein dann muss ich halt auf Ambiligth verzichten.

    #185723 Antworten
    Gabor
    Gast

    Ich schaue seit 1 Woche , Abend von 18 Uhr bis 23 uhr ,und mehr Mals am Vormittag par stunde . Nie hat mit der Reinigung zwischen fernsehen kucken unterbrochen .
    ich weiß nicht wie so aufregst du ?Ich merken überhaupt nicht ,wann durchführt ?!

    #186234 Antworten
    Billy
    Gast

    I have looked forever for info about this, all i knew was it came with some update, and i haven’t found a way to turn it off, or change the time.
    I use google home to start and turn off my TV, and watch everything on a pc connected to the TV so the remote is never used.
    Now i need to have the remote at hand in case this comes, and i need to select not to shut down.

    Is it possible somehow to change the time, or disable it?
    I had my tv for years befor this update and never had a burn-in befor.

    #186235 Antworten
    Toengel
    Administrator

    Hi,

    no – you cannot change the time…

    How often do you see this screens?

    Toengel@Alex

    #186236 Antworten
    Billy
    Gast

    @Toengel

    Well based on what you wrote after 4 hours (Only now know how to see the timer for it to happen after i saw what you wrote), but only once have i gone all the time so it forced me to turn it off in the middel of a movie.
    But i think at least twice a week, every Saturday and Sunday i see the popup on the screen, and have to get the remote to tell it to postpone it.
    Got shows, youtube and stuff running on it in the background when at my PC, if i’m not sitting at it watching something like most of the time.

    And since i can control everything else from my phone or using my voice it ruins my experience with it more then you can imagine to have to get my remote out just for this thing.

    That’s why i hoped when i finally found someone that wrote about it, you would also have a “fix” for it.

    #186554 Antworten
    GBone
    Gast

    Hab heute zum ersten Mal die Meldung bekommen, dass die Bereinigung startet (vor 5 Minuten). Gibt es eine Rückmeldung, wann die Bereinigung abgeschlossen ist?
    In der Meldung am Display stand, dass es bis zu einer Stunde dauern kann.

    #186555 Antworten
    Toengel
    Administrator

    Tachchen,

    du könntest ein USB-Gerät mit LED anschließen… wenn die LED aus ist, sollte die Reinigung vorbei sein.

    Toengel@Alex

    #186557 Antworten
    GBone
    Gast

    Hab einfach mal eine Stunde gewartet ;) jetzt kommt keine Meldung mehr. Da hätte sich Philips über die Ambilight LED eine POST-Code Rückmeldung gönnen können, wenn schon keine Rückmeldung über das Display möglich ist. Danke für die Rückmeldung mit dem USB-Gerät. Werde mit da was mit einem USB/LED-Connector einfallen lassen, dass dann in einen USB-Port kommt

    #187286 Antworten
    Silviu
    Gast

    Hi, sorry for English, my German is not very good.

    On a 55POS9002 I did as suggested by the TV message, but the message comes on and on again, even after leaving it overnight (8h+) to do the OLED cleaning. The TV is practically unusable.

    Any clue/advice?

    By the way, on the 55POS9002 with latest firmware there is no timer.

    Thanks,
    Silviu

    #187287 Antworten
    Billy
    Gast

    Silviu I also got the 55POS9002, and for me it comes up every 4 hours, and after that it comes up again after xx hours, and then next time it comes you don’t get a chance to postpone it, and it just turns off.

    If it just keeps telling you to turn it off when you turn it on after 8+ hours, have you tried to unplug the TV it for 5-10 min?

    Not sure if it does anything but that would be my advice, at least to try it.

    I sure hope that there will be a update that lets you turn off this stupid protection, i had the TV for a year when this update with it came, and never had a problem with ghosting no matter how long/much i watched it befor.

    #187294 Antworten
    Silviu
    Gast

    I have done an OS reboot, but will try your suggestion too.

    The user manual says that, if this operation is happening too often, it might affect the lifetime of the device. And given that it probably happened 10 times+ already, I wonder if I should keep trying and trigger it again and again, as my TV will be out of warranty in a couple of months. Didnnnyone have success with Philips support?

    #187295 Antworten
    Silviu
    Gast

    Now that I read your previous post: I don’t have an option to skip the cleaning of procedure. Just click ok once when the message that cleaning was interrupted appears and a few seconds later press ok that it will start. Then goes to standby.

    Seems that it simply doesn’t record in its counters or flags that the cleaning has been done. Or the cleaning doesn’t actually happen at all.

    In the 10-15 seconds that I can use the TV until the pop-ups appear, I managed to call the cleaning myself (hoping that it would forcefully record the event) and also a reboot. Didn’t help a bit.

    #187298 Antworten
    Billy
    Gast

    If you say that it will be out of warranty in a few month, i would contact where you bought it, and let them have a look at it, because that’s not normal, and perhaps if you are lucky they can’t fix it, and you get a new and a new warranty. :)

    Please let me know what happens after you spoke to them, and good luck with it.
    It’s a good TV, but this update just broke it (Alot more for you then me it sounds like).

Ansicht von 15 Antworten - 16 bis 30 (von insgesamt 56)
Antwort auf: Antwort #187300 in Philips: Informationen zum geänderten OLED-Bereinigungsprozess (Burn-In)
Deine Information:




Die Kommentieren ist durch reCAPTCHA geschützt und es gelten die Datenschutzbestimmungen und Nutzungsbedingungen von Google.

Toengels Philips Blog via WhatsApp-Kanal folgen (Bild antippen/anklicken)!

WhatsApp Logo

Join Toengels Philips Blog on the new WhatsApp channel (tap/click image)!