Hi, I was finally able to get some debug output, but I can’t find any hint why my TV is not working nor why my USB sticks doesn’t provide the update. They are all found (/dev/sda)
NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on Key pad!
ENABLE_WATCHDOG
Power on Key pad!
[CPE]swoption=100a500-c0d5208a
Power on Key pad!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf408eb8c
Request to start secoslast jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff fun c=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x0000 0000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000 b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.339719] Creating worker thread
[0-0.339800] Succsesfuly Created
[0-0.453500] serial8250 serial8250: irq 8 set affinity 0
[0-0.470484] serial8250 serial8250: irq 9 set affinity 0
[0-0.476952] serial8250 serial8250: irq 10 set affinity 0
[0-0.678806] [USB] invalid irq-affinity node value 2
[0-0.698752] [USB] irq 16 invalid irq-affinity node value 3
[0-0.729100] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[0-0.929126] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1 280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
/etc/profile start
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[1-2.625900] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[0-2.633141] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.003107 seconds, 5.0KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.003405 seconds, 4.6KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on System Reset!
ENABLE_WATCHDOG
Power on System Reset!
[CPE]swoption=100a500-c0d5208a
Power on System Reset!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf40aea8c
Request to start secoslast jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.343600] Creating worker thread
[0-0.343683] Succsesfuly Created
[1-0.482114] serial8250 serial8250: irq 8 set affinity 0
[1-0.498935] serial8250 serial8250: irq 9 set affinity 0
[1-0.505418] serial8250 serial8250: irq 10 set affinity 0
[1-0.638822] [USB] invalid irq-affinity node value 2
[1-0.658873] [USB] irq 16 invalid irq-affinity node value 3
[1-0.689840] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[0-0.885120] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
/etc/profile start
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[0-2.596788] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[1-2.603936] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.000688 seconds, 22.7KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.001957 seconds, 8.0KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on System Reset!
ENABLE_WATCHDOG
Power on System Reset!
[CPE]swoption=100a500-c0d5208a
Power on System Reset!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf408ea8c
Request to start secoslast jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.339716] Creating worker thread
[0-0.339798] Succsesfuly Created
[0-0.471505] serial8250 serial8250: irq 8 set affinity 0
[0-0.488249] serial8250 serial8250: irq 9 set affinity 0
[0-0.494690] serial8250 serial8250: irq 10 set affinity 0
[0-0.670797] [USB] invalid irq-affinity node value 2
[0-0.694760] [USB] irq 16 invalid irq-affinity node value 3
[0-0.725135] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[1-1.013108] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
/etc/profile start
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[0-2.690374] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[0-2.697488] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002490 seconds, 6.3KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002121 seconds, 7.4KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # [0-51.990944] sd 0:0:0:0: [sda] No Caching mode page found
[0-51.996215] sd 0:0:0:0: [sda] Assuming drive cache: write through
NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on Key pad!
ENABLE_WATCHDOG
Power on Key pad!
[CPE]swoption=100a500-c0d5208a
Power on Key pad!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf408ea8c
Request to start secoslast jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.335877] Creating worker thread
[0-0.335959] Succsesfuly Created
[1-0.465452] serial8250 serial8250: irq 8 set affinity 0
[1-0.482060] serial8250 serial8250: irq 9 set affinity 0
[1-0.488593] serial8250 serial8250: irq 10 set affinity 0
[1-0.702773] [USB] invalid irq-affinity node value 2
[1-0.722711] [USB] irq 16 invalid irq-affinity node value 3
[1-0.753051] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[1-0.957075] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
[0-2.490992] sd 0:0:0:0: [sda] No Caching mode page found
[0-2.496291] sd 0:0:0:0: [sda] Assuming drive cache: write through
backlight: poweronevent = 1
BootlogoProject: s32BacklightLevel = 0
/etc/profile start
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[1-2.752082] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[1-2.759127] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.000680 seconds, 23.0KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002141 seconds, 7.3KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/ # restart
/bin/sh: restart: not found
/ # shutdown -r now
/bin/sh: shutdown: not found
/ #
NovaTek XBOOT Rev: fdd13eb770
NVT Kconfig : n22060d_emmc_sboot_romvfy_v2_defconfig
fhAC ON……
power_down start
power_down end
72671
DDR_TOOL_VER:3006
page_buffer = 0xfc32dc00
adc6 = 0x29
bs9 = 1
DDRF:NT671D_TPV_32DDR3_1816_4G4G_32DDR3_1816_4G4G_191022_Normal.txt
!!!!param cross border found!!!!
ddr: check_phy(0,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
ddr: check_phy(1,0×300,0x80,0x80) wait 0/5
!!!!param cross border found!!!!
!!!!cmd cross border found!!!!
!!!!param cross border found!!!!
CCI config: 0x06db024a
MAU 0: 0 80000000 – 0 dfffffff
MAU 1: 0 00000000 – 0 7fffffff
Enable MAU swap
moNew Panel Structure
panel name = EU7505_LVD58 b8Mode50Hz = 0
Panel Power GPIO,MSB=4 , LSB=18
Panel BackLight GPIO=1040
Vx1 SSC freq:(30,0×64)
Vx1 SSC percent:(6,0xf)
[_VID_PowerON_Sequence, 337]vx1 init
Set 2 Tcon mode
Xboot Panel Set VX1
Pre-emphasis=0x5
-> TKB_V_MAX, lvds/nt671d/lvds.c
set OSD display window 3840*2160
xzload warm reset code complete
bdjump to boot1
;boot1 start_board
k:1 f:1 p:1
emmc read via indirect DMA: size 0x40 is not 0x200 align
linux 2808000
UNZIP_BUFFER 4908000
gpt id 21 fail
STBC version : fdd13e
Power on Key pad!
ENABLE_WATCHDOG
Power on Key pad!
[CPE]swoption=100a500-c0d5208a
Power on Key pad!
stUpdState.sign=UPST, stUpdState.crc32=0, stUpdState.boot_switched=1
boot switched don’t do any boot switch!!
current bcounter=0 and ret=0
[Secure] RPMB: 1, mode: 0
tvemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x40d894 is not 0x200 align
ikemmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0xbac7a8 is not 0x200 align
xzfdt_id_str = N22060_671D_A32_TPV
emmc read via indirect DMA: size 0x40 is not 0x200 align
emmc read via indirect DMA: size 0x110c8 is not 0x200 align
_addr_aarch32: 0xeffefff0=0x1ff00390
_addr_aarch64: 0xeffeffe0=0xf508eb84
Request to start secoslast jump
Start to wait secos
Boottime: 313
Finish to wait secos
MAILBOX#2 0x80b0B2
a64m Rev: b3de9ec-dirty
cpu0 el1_entry=2808000
cpu0: PSCI_VERSION
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x80000000 rc=0xffffffffffffffff func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x84000001 rc=0x00000002 func=0x00000000
cpu0: PSCI_FEATURES
func_psci_features: cpu0 id=0x8400000a arg0=0x8400000e rc=0x00000000 func=0x0000b67c
cpu0: CPU_ON for cpu1 entry0x02809980
[0-0.000000] NVT GIT info : f0b1b4efef00
[0-0.339727] Creating worker thread
[0-0.339812] Succsesfuly Created
[1-0.478262] serial8250 serial8250: irq 8 set affinity 0
[1-0.494943] serial8250 serial8250: irq 9 set affinity 0
[1-0.501443] serial8250 serial8250: irq 10 set affinity 0
[1-0.702826] [USB] invalid irq-affinity node value 2
[1-0.722752] [USB] irq 16 invalid irq-affinity node value 3
[1-0.753060] nvt_thermal fd0f0c28.tsensor: failed to register sensor id 0: -19
[1-0.949132] pstore: allocate compression buffer error!
/etc/rc.local start
bootlogo start first
mount: mounting sysfs on /sys failed: Device or resource busy
Main: [bootlogo V0.1] start [Mar 4 2020-10:50:48]
BootlogoProject: Project Tpye:N22060_671D_A32_TPV
BootlogoProject: [088 001 020 000 000 108 000 108]
BootlogoProject: [PHILIPS]
BootlogoBase: -p 1712128@/dev/mmcblk0p1 -a 512 -f 1777664@/dev/mmcblk0p1 -t 5 -i 1 -s 0x100000 -b 0x3B800000 0x03A00000 -m 0x1 -p1 1920 1080 -p2 1920 1080 -p3 1280 720
BootlogoBase: OSD info from device tree:addr[0xb9400000] size[0x6c00000]
[1-2.497841] sd 0:0:0:0: [sda] No Caching mode page found
backlight: power[1-2.503494] sd 0:0:0:0: [sda] Assuming drive cache: write thonevent = 1
rough
BootlogoProject: s32BacklightLevel = 0
/etc/profile start
APP MOUNT on /dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/devcfg is mounted.
/dev/nvt-part-name/devcfg: clean, 25/2560 files, 1476/10240 blocks
[1-2.765180] device-mapper: verity: 253:4: metadata block 202240 is corrupted
[0-2.778405] EXT4-fs (dm-5): unable to read superblock
mount: mounting /dev/nvt-part-name/apexe1 on /mtd_apexe failed: Invalid argument
mtd_apexe mount CHK_VAL=255, VA_MTD_EXE=/dev/nvt-part-name/apexe1
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/demo is mounted.
/dev/nvt-part-name/demo: clean, 15/35200 files, 72140/140800 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apcobalt is mounted.
/dev/nvt-part-name/apcobalt: clean, 958/12824 files, 37747/51200 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.000670 seconds, 23.3KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/apdat is mounted.
/dev/nvt-part-name/apdat: recovering journal
/dev/nvt-part-name/apdat: clean, 1173/38456 files, 59803/153600 blocks
1+0 records in
1+0 records out
16 bytes (16B) copied, 0.002870 seconds, 5.4KB/s
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/tmpdat is mounted.
/dev/nvt-part-name/tmpdat: recovering journal
/dev/nvt-part-name/tmpdat: clean, 770/68688 files, 117398/274427 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/aqtbl is mounted.
/dev/nvt-part-name/aqtbl: clean, 16/128 files, 318/1024 blocks
e2fsck 1.43.3 (04-Sep-2016)
ext2fs_check_if_mount: Can’t check if filesystem is mounted due to missing mtab file while determining whether /dev/nvt-part-name/pqtbl is mounted.
/dev/nvt-part-name/pqtbl: clean, 15/12824 files, 10825/51200 blocks
/